Stuart Batty 004115 1-1/2" Domed/Straight Negative Rake Scraper

(No reviews yet) Write a Review
Sorry, this product is no longer available
  • Stuart Batty 004115 1-1/2" Domed/Straight Negative Rake Scraper

Out of stock


Requires a Stuart Batty Taper-Lock Handle, sold separately.

Designed for a technique used since the 1500s for turning ivory and dense exotics, the new family of negative rake scrapers are the first commercial tool produced by Stuart Batty. Sold with SB Tools signature grey iron bolster, they are perfectly compatible with the Taper-Lock Handle System, and they complete Stuart Batty's revolutionary woodturning product line. The negative rake scrapers work exceptionally well down the sidewall of a vessel. The negative rake scraper can work the whole inside surface down to a very thin wall. However, due to the fact that these scrapers can cut past center, we recommend using the deep bowl conventional scraper for bottom 1/3 of the bowl. Enjoy unmatched control and vibration dampening. There are 4 types of these negative rake scrapers, in a variety of widths.

All of Stuart Batty's Negative Rake Scrapers come with one replaceable, double-ended blade. One edge is domed and the other edge is straight. Note that the straight edge is slightly domed to help with traversing cuts.

Recomended Handle Length:
Minimum: 9 inches
Maximum: 20 inches


Features and Benefits:
- Capable of an exceptional finish
- Start sanding at high grits
- Never aggressive
- Very easy to use and resharpen
- Technique used by all levels including professionals
- Supplied with grey iron bolster for exception vibration dampening
- CPM 10V blades, 5 times the life of any M2
- Ready to use out of the box with 40-degree included angle for maximum burr size
- 1/2 inch thick substrate, 5/8 inch thick for deep bowl version
- Widest range of widths from 1/2 inch to 3 inch wide blades
- Wide range of reversible blade, works both ways up
- Fits any of ten handle lengths for optimum control
View AllClose