Vicmarc V00289-3 VM150 6" Chuck 1-1/4"x8tpi with Jaws
- Normally Ships in 1-3 Business Days
- Calculated at Checkout
This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws
Direct thread 1-1/4"x8tpi. This chuck will thread directly on to most full size lathes sold in the USA without an insert or adapter.
The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated (fully opens within 3 revolutions), the other to tighten using the T key as you would in a standard key operated scroll chuck.
|To switch from lever operated to key operated, line up the two dots as shown above, and rotate the locking pinion using the 10mm T-bar (supplied with the chuck). Turn clockwise to engage and anti-clockwise to disengage|