Vicmarc VM100 Insert 1" x 8tpi
- Normally Ships out in 1-3 Business Days
- Calculated at Checkout
This insert will adapt the Vicmarc VM90 and VM100 chucks to any lathe with a 1" x 8tpi Spindle thread.
Vicmarc's Vacuum Cups also accept this insert
All left hand, left hand/right hand, Geiger, M30x3.5, M33x3.5 and 1 1/4x8 inserts come with a grub screw locking facility for safety to prevent the chuck from unscrewing itself while turning outboard. Note: When mounting insert onto the chuck, ensure that the grub screw is not protruding past the insert face, and then tighten the insert against the chuck face then tightening the grub screw.
Purchased to allow me to use the chuck on multiple lathes and has served that purpose well.