Vicmarc VM120 Insert M33 x 3.5 Left Thread

(No reviews yet) Write a Review
Normally Ships out in 1-3 Business Days
Calculated at Checkout


This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a M33x3.5 left spindle thread (Most likely on the outboard side).

Vicmarc's Eccentric chucks also accept this insert

All left hand, left hand/right hand, Geiger, M30x3.5, M33x3.5 and 1 1/4x8 inserts come with a grub screw locking facility for safety to prevent the chuck from unscrewing itself while turning outboard. Note: When mounting insert onto the chuck, ensure that the grub screw is not protruding past the insert face, and then tighten the insert against the chuck face then tightening the grub screw.

View AllClose