Amana Tool Company

Cut half-round grooves for fluted moldings, columns, millwork, and signs using a core box bit. Used with an edge guide, it can cut coves. Can be used with handheld, table-mounted and CNC routers.

Cut half-round grooves for fluted moldings, columns, millwork, and signs using a core box bit. Used with an edge guide, it can cut coves. Can be used with handheld, table-mounted and CNC routers.

Cut half-round grooves for fluted moldings, columns, millwork, and signs using a core box bit. Used with an edge guide, it can cut coves. Can be used with handheld, table-mounted and CNC routers.

Use any of the flush trimming bits for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the...

Use any of the flush trimming bits for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the...

Trim the edges of face frames flush with cabinet sides with this bit. At the same time, cut a decorative 'V' groove to conceal the seam between the frame and the case.

This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router. The solid construction reduces vibration for the smoothest cut possible with a two-flute bit.

The covetto form produced by the cove bit is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove as well to detail the...

The covetto form produced by the cove bit is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove as well to detail the...

The covetto form produced by the cove bit is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove as well to detail the...

The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it isn't an upside-down ogee). The curve starts at the top as a concave, and fairs down into a...

The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it isn't an upside-down ogee). The curve starts at the top as a concave, and fairs down into a...

Cut 1/4, 5/16, 7/16, and 3/8 rabbets with a handheld or table mounted router. For best results use in a router table.

Ingenious rabbeting bits that will enable rabbet cuts from flush through 3/4 in 1/16 increments, and five undersized plywood sizes, using optional collars. Particularly useful when working with large...

Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles. For best results use in a router table!

Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles. For best results use in a router table!

The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a...

The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a...

The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a...

The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a...

Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit. The width of one fillet is set by the pilot bearing size, while the other is controlled by the...

Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit. The width of one fillet is set by the pilot bearing size, while the other is controlled by the...

Here's the ideal laminate trimming router bit for high volume production. Solid carbide and integral pilot (no bearing to maintain) extend life of router bit, slim configuration reduces vibration...

Shape the full edge of a workpiece with a bullnose radius bit. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. The "nose diameter" (M) is the...

Shape the full edge of a workpiece with a bullnose radius bit. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. The "nose diameter" (M) is the...

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Produce clean, modern chests and cabinets uninterrupted by hardware pulls and knobs by integrating the pulls into the doors, drawers and lips. These one-pass cutters offer many appearance and...

The positions of the bead and the cove are reversed on this series of bits, with the bead coming off the bearing. With the optional 3/8 pilot bearing, the bit produces a fillet at the base of the...

The ogee is one the basic shapes used in moldings and decorative profiles. An S-shaped curve, it is convex at the top fairing down into a concave (shown inverted). The ogee bit is characterized by...

The positions of the bead and the cove are reversed on this series of bits, with the bead coming off the bearing. With the optional 3/8 pilot bearing, the bit produces a fillet at the base of the...

Produce three slightly different profiles using this bit: an edge bead with or without a fillet and a full corner bead by altering the bit extension or rolling the workpiece between passes. This...

This bit produces an undulating curve with two convex forms flanking a concave form. All the radii are equal. A shoulder on the cutter can form a fillet, depending upon depth-of-cut setting. Use in a...

This tool was designed to cut over 40 different molding patterns. By making simple adjustments to the cutter height and fence position, and making two or more passes, you can achieve a wide variety...

Many different profiles for cutting base molding, chair rail, door and window casing, cabinet molding and other millwork.

Similar to the standard horizontal raised panel series but with new back cutters to cut the inside of the panel. Includes two different bearings to allow for safer two-pass operation. Use with router...

The positions of the bead and the cove are reversed on this series of bits, with the bead coming off the bearing. With the optional 3/8 pilot bearing, the bit produces a fillet at the base of the...

Special series of tools for crown or architectural molding. Recommended for use in a router table using a heavy duty multi-speed router and fence.

VERTICAL Raised Panels Bits designed for router tables only. Use routers with 1-1/2 horsepower minimum and make several passes for best finish, tool life and safety. Will not cut arched or curved...