Replacement 10" Standard Brake cartridge for a Sawstop Tablesaw. Any standard steel blade with steel or carbide teeth can be used. You should not use non-conductive blades or blades with non-conductive hubs or teeth (example: diamond blades). They will prevent the SawStop safety system from applying the electrical signal on the blade that is required to sense skin contact. Steel blades and dado sets with a lacquer finish or other coating on the teeth should not be used as the coating may inhibit or slow the speed at which the safety system detects skin contact. However, most coated blades do not cover the blade teeth. Those blades may be used on SawStop saws. Further, blades with depth-limiting shoulders may take longer to stop in the event of an accident than standard blades, and you could receive a more serious injury. Therefore, SawStop recommends using blades without depth-limiting shoulders.
The vast majority of commercially-available blades are accurate to their advertised diameter, and work well in SawStop saws. If your blade is larger or smaller than the advertised size, SawStop cast-iron saws allow for some adjustability of the blade/brake gap to accommodate. Jobsite Saw blade/brake gap is not adjustable, so users should not operate blades more than 1/16th inch diameter over the specified blade size. Never use a blade that does not “clear” the aluminum brake pawl.
***Please note: NOT compatible with CB Model numbers. If your model number starts with "CB", you will need an older clear cartridge. We have them in stock, but cannot sell them online. Please call 1-800-779-7458 or 702-871-0722 to order a clear cartridge.
This product hasn't received any reviews yet. Be the first to review this product!