Chuck Jaws

Chuck Jaws

  • Out of stock
    Vicmarc V00639 VM100 Bowl Jaws 220mm (8-5/8")

    Vicmarc

    Vicmarc V00639 VM100 Bowl Jaws 220mm (8-5/8")

    $97.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00639
    $97.95
    Out of stock
  • Vicmarc V00640 VM100 Bowl Jaws 285mm (11-1/4")
    Add to Cart

    Vicmarc

    Vicmarc V00640 VM100 Bowl Jaws 285mm (11-1/4")

    $99.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00640
    $99.95
    Add to Cart
  • Vicmarc V00641 VM100 Bowl Jaws 385mm (15-1/8")
    Add to Cart

    Vicmarc

    Vicmarc V00641 VM100 Bowl Jaws 385mm (15-1/8")

    $105.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00641
    $105.95
    Add to Cart
  • Vicmarc V00642 VM100 Dovetail Jaws 100mm (4") Vicmarc V00642 VM100 Dovetail Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00642 VM100 Dovetail Jaws 100mm (4")

    $54.95
    Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot.  The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart .  VM90 and...
    V00642
    $54.95
    Add to Cart
  • Vicmarc V00643 VM100 Dovetail Jaws 144mm (5-5/8") Vicmarc V00643 VM100 Dovetail Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00643 VM100 Dovetail Jaws 144mm (5-5/8")

    $62.95
    Due to customer demand this jaw has been designed to accommodate larger workpieces. Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a...
    V00643
    $62.95
    Add to Cart
  • Vicmarc V00644S VM100 Dovetail Jaws 78mm (3")
    Add to Cart

    Vicmarc

    Vicmarc V00644S VM100 Dovetail Jaws 78mm (3")

    $55.95
    Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot. These Jaws were specially made for Woodworker's Emporium due to customer demand to fall in between the Standard (1-7/8") and the 100mm (4") Jaws. The...
    V00644S
    $55.95
    Add to Cart
  • Vicmarc V00647 VM100 Long Nose Jaws 35mm Vicmarc V00647 VM100 35mm Long Nose Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00647 VM100 Long Nose Jaws 35mm

    $55.95
    These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. The sizes indicated on the drawing are when the jaws form a perfect...
    V00647
    $55.95
    Add to Cart
  • Vicmarc V00649 VM100 Multipurpose Jaws Vicmarc V00649 VM100 Multipurpose Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00649 VM100 Multipurpose Jaws

    $169.95
    By removing one or more of the dovetail segments from these jaws, they are adaptable to a variety of uses. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart.  VM90 and...
    V00649
    $169.95
    Add to Cart
  • Vicmarc V00650 VM100 Pin Jaws 25mm (1") Vicmarc V00650 VM100 25mm Pin Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00650 VM100 Pin Jaws 25mm (1")

    $54.95
    These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. They are ideal for turning salt and pepper shakers. The sizes indicated on the drawing are when the jaws form a perfect...
    V00650
    $54.95
    Add to Cart
  • Vicmarc V00651 VM100 Pin Jaws 35mm (1-3/8") Vicmarc V00651 VM100 35mm Pin Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00651 VM100 Pin Jaws 35mm (1-3/8")

    $64.95
    Pin Jaws, designed by well known American Woodturner and author Dick Sing, are used for such items as kaleidoscopes and pepper grinders, etc. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws...
    V00651
    $64.95
    Add to Cart
  • Vicmarc V00652 VM100 Plastic Jaws 125mm (5") Vicmarc V00652 VM100 125mm Plastic Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00652 VM100 Plastic Jaws 125mm (5")

    $23.95
    Made from Acetyl and allows you to turn you own chuck jaws for whatever diameter is required to hold the work piece. Once screwed to a chuck, simply turn the Acetyl Jaws for each job required using turning chisels. The sizes indicated on the drawing are...
    V00652
    $23.95
    Add to Cart
  • Vicmarc V00653 VM100 Shark Jaws 48mm (1-3/4") Vicmarc V00653 VM100 48mm Shark Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00653 VM100 Shark Jaws 48mm (1-3/4")

    $55.95
    Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpieces. The...
    V00653
    $55.95
    Add to Cart