Vicmarc
Vicmarc V00684 VM120 Long Nose Jaws
- SKU:
- V00684
- UPC:
- MPN:
- V00684
- Availability:
- Ships from Store Within 3 Business Days
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$94.00
Was:
— You save
Frequently bought together:
Description
These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example, when turning serviette rings or remounting rough turned work.
Related Products


Vicmarc V00647 VM100 Long Nose Jaws 35mm
Vicmarc
MSRP:
Now:
$69.00
Was:
These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened.
The sizes...
V00647


Vicmarc V00695 Standard Jaws for VM120
Vicmarc
MSRP:
Now:
$67.00
Was:
Supplied with the chuck, but also available to purchase separately.
V00695
Out of stock


Vicmarc V00696 VM120 Step Jaws
Vicmarc
MSRP:
Now:
$68.00
Was:
Step Jaws, designed by the famous Australian woodturner and author Richard Raffan, and are used for holding a range of spigot sizes with minimum jaw movement and without the necessity to change the...
V00696
Out of stock

Vicmarc V00698 VM120 Pen Blank Jaws
Vicmarc
MSRP:
Now:
$59.00
Was:
Pen Blank Jaw set comes as a set of 2 and are designed to clamp pen blank squares for drilling.
These Jaws can clamp from 15mm square blanks up to 63mm square blanks.
V00698
Out of stock


Vicmarc V00689 VM120 Pipe Jaws
Vicmarc
MSRP:
Now:
$99.95
Was:
The Pipe Jaw set comes as a set of 2 and are designed to clamp square sections of wood. Items such as smoking pipes and other offset parts can be made using these Jaws. The four points on each Jaw...
V00689
Customers Also Viewed

Vicmarc VM120 5" T-Bar Chuck Direct Thread 1-1/4"x8tpi
Vicmarc
MSRP:
Now:
$299.00 - $315.00
Was:
Direct thread 1-1/4"x8tpi. This chuck will thread directly on to most full size lathes sold in the USA without an adapter.
The VM120 T- Bar Allen Key operated chuck provides one - hand tightening...


Vicmarc V00647 VM100 Long Nose Jaws 35mm
Vicmarc
MSRP:
Now:
$69.00
Was:
These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened.
The sizes...
V00647
Out of stock

Vicmarc V00285-5 VM120 5" T-Bar Chuck with Jaws
Vicmarc
MSRP:
Now:
$309.00
Was:
The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes...
V00285-5
Out of stock


Vicmarc V00688 VM120 35mm Pin Jaws
Vicmarc
MSRP:
Now:
$94.00
Was:
These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn...
V00688
Out of stock


Vicmarc V00692 VM120 Shark Jaws 55mm (2-1/8")
Vicmarc
MSRP:
Now:
$72.00
Was:
Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and...
V00692
Out of stock

Vicmarc V00284-5 VM120 5" T-Bar Chuck No Jaws
Vicmarc
MSRP:
Now:
$289.00
Was:
The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes...
V00284-5


Vicmarc V00693 VM120 Shark Jaws 68mm (2-5/8")
Vicmarc
MSRP:
Now:
$74.00
Was:
Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and...
V00693
Out of stock


Vicmarc V00689 VM120 Pipe Jaws
Vicmarc
MSRP:
Now:
$99.95
Was:
The Pipe Jaw set comes as a set of 2 and are designed to clamp square sections of wood. Items such as smoking pipes and other offset parts can be made using these Jaws. The four points on each Jaw...
V00689


Vicmarc V00695 Standard Jaws for VM120
Vicmarc
MSRP:
Now:
$67.00
Was:
Supplied with the chuck, but also available to purchase separately.
V00695
Out of stock


Vicmarc V00687 VM120 25mm Pin Jaws
Vicmarc
MSRP:
Now:
$68.95
Was:
These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn...
V00687