Vicmarc
Vicmarc V00284-5 VM120 5" T-Bar Chuck No Jaws
- SKU:
- V00284-5
- Availability:
- Normally Ships out in 1-3 Business Days
- Shipping:
- Calculated at Checkout
Description
The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures consistent, smooth action by preventing dust and debris from getting into scroll of the chuck.
The backing lid is also indexed for those woodturners who do not have indexing facility on their lathes. The VM120 will hold most work up to 500mm( 20in) in diameter with standard jaws.
Includes:
VM120 Chuck + Insert
4mm T-Bar Allen Key
10mm T-Bar Allen Key
Woodscrew
Owner's manual
9.5mm Tommy Bar
1 Review
-
Vicmarc 120 chuck
Of all the chucks and jaws I have in nineteen years of turning, this is by far the best and easiest to use.
Related Products
Vicmarc
Vicmarc V00684 VM120 Long Nose Jaws
$69.95
These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example,...
V00684
$69.95
Vicmarc
Vicmarc V00677 VM120 Dovetail Jaws 128mm (5")
$65.95
Designed for mounting bowls by expanding into a recess or clamping onto a spigot.
The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm...
V00677
$65.95
Vicmarc
Vicmarc V00285-5 VM120 5" T-Bar Chuck with Jaws
$279.95
The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes...
V00285-5
$279.95
Vicmarc
Vicmarc V00288-5 VM150 6" Chuck No Jaws
$369.95
This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated (fully opens...
V00288-5
$369.95
Vicmarc
Vicmarc VM120 5" T-Bar Chuck 1-1/4"x8tpi
$259.95 - $289.95
Direct thread 1-1/4"x8tpi. This chuck will thread directly on to most full size lathes sold in the USA without an adapter. The VM120 T- Bar Allen Key operated chuck provides one - hand tightening...
$259.95 - $289.95
