Vicmarc
Vicmarc V00637 Set of 4 Backing Jawset for VM100
- SKU:
- V00637
- UPC:
- MPN:
- V00637
- Availability:
- Ships from Store Within 3 Business Days
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$89.95
Was:
— You save
Frequently bought together:
Related Products
Out of stock
Vicmarc V00632 VM100 Replacement Pinion
Vicmarc
MSRP:
Now:
$22.95
Was:
Replacement pinion for Vicmarc VM90/100 chucks
V00900


Vicmarc V00642 VM100 Dovetail Jaws 100mm (4")
Vicmarc
MSRP:
Now:
$62.00
Was:
Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot.
The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved...
V00642


Vicmarc V00657 VM100 Standard Jaws
Vicmarc
MSRP:
Now:
$59.00
Was:
These are the standard jaws supplied with the VM100 chuck, also available to purchase separately.
The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when...
V00657

Vicmarc V01000 VM100 Replacement Scroll
Vicmarc
MSRP:
Now:
$74.95
Was:
Replacement scroll for Vicmarc VM100 chucks
V01000
Out of stock

Vicmarc V00670 Set of 4 Backing Jawset for VM120
Vicmarc
MSRP:
Now:
$94.95
Was:
Replacement backing jaws for Vicmarc VM120 chucks
V00670
Customers Also Viewed
Out of stock
Vicmarc V00632 VM100 Replacement Pinion
Vicmarc
MSRP:
Now:
$22.95
Was:
Replacement pinion for Vicmarc VM90/100 chucks
V00900

Vicmarc V00639 VM100 Bowl Jaws 220mm (8-5/8")
Vicmarc
MSRP:
Now:
$118.00
Was:
The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either...
V00639

Vicmarc VM120 Insert M33 x 3.5 Left Thread
Vicmarc
MSRP:
Now:
$39.95
Was:
This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a M33x3.5 left spindle thread (Most likely on the outboard side). Vicmarc's Eccentric chucks and the Vicmarc Oval...
V00611
Out of stock

Vicmarc VM120 Insert M33 x 3.5
Vicmarc
MSRP:
Now:
$39.95
Was:
This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with an M33 x 3.5 Spindle thread.
Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert
All...
V00612
Out of stock
Vicmarc V00901 VM120 Replacement Pinion
Vicmarc
MSRP:
Now:
$22.95
Was:
Replacement pinion for Vicmarc VM120/150 chucks
V00901

Vicmarc V00641 VM100 Bowl Jaws 385mm (15-1/8")
Vicmarc
MSRP:
Now:
$124.00
Was:
The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either...
V00641
Out of stock

Vicmarc VM120 Insert 1" x 8tpi
Vicmarc
MSRP:
Now:
$39.95
Was:
This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1" x 8tpi Spindle thread.
Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert
All...
V00581

Vicmarc VM120 Insert 1-1/4" x 8tpi Right/Left Thread
Vicmarc
MSRP:
Now:
$39.95
Was:
This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1-1/4" x 8tpi Spindle thread. Will work on both right and left hand threads.
Vicmarc's Eccentric chucks and the...
V00569


Vicmarc V00642 VM100 Dovetail Jaws 100mm (4")
Vicmarc
MSRP:
Now:
$62.00
Was:
Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot.
The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved...
V00642


Vicmarc V00650 VM100 Pin Jaws 25mm (1")
Vicmarc
MSRP:
Now:
$59.00
Was:
These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. They are ideal for turning salt and pepper shakers.
The sizes...
V00650