Vicmarc V00767-3 VL300 Wood Lathe Bed Only

(No reviews yet) Write a Review
Please call 1-800-779-7458 to order

Out of stock

Frequently bought together:


Please call 1-800-779-7458 to order.


The VL300 Bench Mount series is designed to mount on your own bench and comes with a 3 step motor pulley for use with your own motor (motor and inverter not included).

The three-step pulleys provide 3 ratios 1:1 for small to medium size work; 1:1.5 for medium to large work; and 1:3 for large work.

The VL300 short bed version has an optional 500mm or 1000mm bolt on extension facility. By bolting the extension on to the end of the lathe the distance between centres will either be 1000mm or 1500mm. Precision machined face for bolt on extension bed or swing away tailstock support, includes four bolts and 2 ground bushes

VL300S BM Specifications (metric conversions are approximate)

Spindle Thread: 1-1/4" x 8tpi
Center Height: 300mm (12")
Swing Over Bed: 600mm (24")
Distance Between Centres: 500mm (20")
Work Height (Bed Bottom to Spindle Centre): 452mm (18")
Indexing Holes: 24
Headstock and Tailstock Spindle: No. 2 MT
Spindle Bearings: Taper Roller
3 Speeds: 469, 1020, 1500 rpm 
Toolrest Post Diameter: 30mm 
Hole Through Headstock Spindle: 15mm (5/8")
Hole Through Tailstock Spindle: 10.5mm (3/8")
Quill Travel: 75mm
Net Weight: 117kg (257 lbs)
Length x Width x Height(mm): 1150x400x720 (45" x 16" x 28")

Standard Accessories

1x Faceplate 150mm (6")
1x Live Centre
1x Tool Rests 300mm (12")
1x 10mm Knockout Bar
1x Drive Dog
1x Spanner
1x 3 Step Motor Pulley
1x Vicmarc Hat
1x Owner's Manual

View AllClose

0 Reviews

View AllClose