Vicmarc

Replacement VFD Drive for Vicmarc Lathes made by Fuji Electric, Model number FRN2.2E1E-7A

The Vicmarc Deep Hole Drilling Tailstock can be used in place of a traditional tailstock and is suitable for fast and conventional drilling.  The Deep Hole Drilling Tailstock can drill up...

Quickly and accurately size your tenons for the Escoulen Eccentric Chuck. Measures 10mm, 18mm, 22mm, 32mm, and 40mm tenons. 

Quickly and accurately size your tenon for the Vicmarc Eccentric Chuck #3. Measures 22mm, 40mm, and 52mm tenons. 

Drill a perfectly centered hole in your blank on your lathe using this unique lathe chuck. The chuck includes two jaws that will hold your blanks perfectly centered at the headstock. Mount a...

Drill a perfectly centered hole in your blank on your lathe using this unique lathe chuck. The chuck includes two jaws that will hold your blanks perfectly centered at the headstock. Mount a...

The Vicmarc Grinding Rest is used to sharpen tools such as skew chisels, parting tools and roughing gouges etc. The Grinding Rest comes with 3 Jigs and a setting gauge to allow easy setup and use...

The Vicmarc Sharpening Jig is used to sharpen bowl gouges, spindle gouges and a variety of other tools.  The unique design of the Vicmarc Sharpening Jig gives you extra swing...

Professional duty live center designed for consistent use. Morse Taper #2

For use with the Vicmarc Eccentric Chuck #3

For use with the Vicmarc Eccentric Chuck #3

This replacement pin holds the pinion in place on Vicmarc Chucks. Works for both the VM100 and VM120. This is the older style pin and does not have threads at the top like the newer version. It will...

Pen Blank Jaw set comes as a set of 2 and are designed to clamp pen blank squares for drilling.These Jaws can clamp from 10mm square blanks up to 48mm square blanks.

Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot. These jaws are custom made dovetail jaws for Woodworkers Emporium only. We felt there was an need...

These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example,...

The Pipe Jaw set comes as a set of 2 and are designed to clamp square sections of wood. Items such as smoking pipes and other offset parts can be made using these Jaws. The four points on each Jaw...

Pen Blank Jaw set comes as a set of 2 and are designed to clamp pen blank squares for drilling. These Jaws can clamp from 15mm square blanks up to 63mm square blanks.

3/4" OD Reduction Bushes are available in four sizes.  Hole Diameter  Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259

3/4" OD Reduction Bushes are available in four sizes.  Hole Diameter  Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259

3/4" OD Reduction Bushes are available in four sizes.  Hole Diameter  Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259

3/4" OD Reduction Bushes are available in four sizes.  Hole Diameter  Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259

Extra long VM100 chuck wrench used when using large jaws such as bowl jaws on you VM100 chuck

Extra long wrench for VM1200 chuck when using bowl jaws

This insert will adapt the Vicmarc VM90 and VM100 chucks to any lathe with a 1" x 8tpi Spindle thread. Vicmarc's Vacuum Cups also accept this insert All left hand, left hand/right hand, Geiger,...

This insert will adapt the Vicmarc VM90 and VM100 chucks to any lathe with a 1-1/4" x 8tpi Spindle thread. Vicmarc's Vacuum Cups also accept this insert All left hand, left hand/right hand, Geiger,...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1" x 8tpi Spindle thread. Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert All...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1-1/4" x 8tpi Spindle thread. Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this...

500mm Extension Bed for the Vicmarc VL240 Lathe, requires V01059 Extension Bed Stand. Ideal for turning between centers. Pictured with Lathe and Extension stand, sold separately

10mm ball for off axis turning on an Escoulen Eccentric Chuck. Requires a ball adapter if you're using the new Vicmarc Escoulen Chuck.

Replacement T handle allen wrenches for Vicmarc chucks

Replacement T-handle allen wrench for jaw screws on Vicmarc VM120, VM140, and VM150 chucks

Replacement T handle allen wrenches for Vicmarc chucks

Replacement T handle allen wrenches for Vicmarc chucks

Replacement T handle allen wrenches for Vicmarc chucks

Replacement foam pad for V01224 vacuum plate. Includes foam pad only, plate sold separately.

helpful for tightening or removing inserts on chucks or VOD

Female thread: 1" x 8tpi Male thread: 1.25" x 8tpi

Female thread: 1" x 8tpiMale thread: 1.5" x 8tpi

Female thread: 1" x 8tpi Male thread: 3/4" x 16tpi

Female thread: 1.25" x 8tpiMale thread: 1" x 8tpi