Vicmarc

Female thread: 1.25" x 8tpi Male thread: 1.5" x 8tpi

Female thread: 1.25" x 8tpi Male thread: M33 x 3.5

Female thread: 1.5" x 8tpiMale thread: 1" x 8tpi

Female thread: 1.5" x 8tpiMale thread: 1.25" x 8tpi

Female thread: 1.5" x 8tpiMale thread: M33 x 3.5

Female thread: M33 x 3.5 Male thread: 1" x 8tpi

Female thread: M33 x 3.5 Male thread: 1.25" x 8tpi

Replacement bowl jaw grips for all the bowl jaws. Set of 8 Screws, washers, inside sleeves, red unique stoppers that works either internally or externally.

500mm Extension Bed can be attached to the lathe with no support leg. Ideal for turning between centers.

Heavy duty 20mm cup live center

Light duty cup style live center

The VM100 T - Bar Allen Key operated chuck allows for handed tightening with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll.  Keyed chucks cannot be beaten when is comes...

The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes...

The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes...

This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated (fully...

This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated...

The Vicmarc Escoulen Chuck originally designed by Jean Francois Escoulen and manufactured by Vicmarc expands the possibilities for off-axis turning. The accessories also allow multi-axis turning...

The Vicmarc Escoulen Chuck originally designed by Jean Francois Escoulen and manufactured by Vicmarc expands the possibilities for off-axis turning. The accessories also allow multi-axis turning...

The Eccentric Chuck #4 is designed and manufactured by Vicmarc Machinery and it expands the possibilities for off center turning. This version has a direct thread of 1-1/4"x8tpi. The main feature of...

The Eccentric Chuck #4 is designed and manufactured by Vicmarc Machinery and it expands the possibilities for off center turning. The main feature of the chuck is its infintely variable axis setting...

Used to set a height on your toolrest allowing you to unlock the toolrest and swivel/move the toolrest without changing the set height.

Used to set a height on your toolrest allowing you to unlock the toolrest and swivel/move the toolrest without changing the set height.

22mm ball for off axis turning on an Escoulen Eccentric Chuck. Requires a ball adapter if you're using the new Vicmarc Escoulen Chuck.

40mm ball for off axis turning on an Escoulen Eccentric Chuck. Requires a ball adapter if you're using the new Vicmarc Escoulen Chuck.

For use with the Vicmarc Eccentric Chuck. Requires a 10, 22, or 40mm ball (ball sold separately). Also accepts the threaded ball for a the eccentric faceplate Click here for a Guide to the Vicmarc...

M30x2 Threaded faceplate for Vicmarc Escoulen Chuck for multi-axis turning. Requires Vicmarc V00369 threaded ball. 90mm (3-1/2") diameter

M30x2 Threaded ball for Vicmarc Escoulen Chuck. Use with V00368 Threaded faceplate for multi-axis turning.

22mm cup chuck for the Vicmarc Escoulen Eccentric Chuck. Allows for off center turning only. A Ball adapter is required to do any off axis turning.

90mm faceplate for the Vicmarc Escoulen Eccentric Chuck. Allows for off center turning only. A Ball adapter is required to do any off axis turning.

Requires a Vicmarc V00367 Ball Adapter and either a 10mm, 22mm, or 40mm ball. A threaded ball and faceplate can also be used.

The Eccentric Chuck #2 allows multi-axis turning and will accept all the accessories made for the Vicmarc Escoulen Chuck. Direct thread, meaning it will thread directly onto an 1-1/4"x8tpi spindle...

The Eccentric Chuck #2 allows multi-axis turning and will accept all the accessories made for the Vicmarc Escoulen Chuck. This comes with insert pickup, available in a variety of sizes to adapt to...

For VM90/100. These can be used instead of the traditional faceplate. They allow remounting of prepared blanks by mounting directly onto the chuck jaws. Also can be used for turning green wood that...

For VM90/100. These can be used instead of the traditional faceplate. They allow remounting of prepared blanks by mounting directly onto the chuck jaws. Also can be used for turning green wood that...

For VM120/140/150. These can be used instead of the traditional faceplate. They allow remounting of prepared blanks by mounting directly onto the chuck jaws. Also can be used for turning green wood...

For VM120/140/150. These can be used instead of the traditional faceplate. They allow remounting of prepared blanks by mounting directly onto the chuck jaws. Also can be used for turning green wood...

One replacement plastic grip for Vicmarc bowl jaws.

Replacement pinion for Vicmarc VM90/100 chucks

Replacement backing jaws for Vicmarc VM90/100 chucks

The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either...