Vicmarc

Replacement scroll for Vicmarc VM100 chucks

Replacement scroll for Vicmarc VM120/150 chucks

Use 1 inch diameter post toolrests in your Vicmarc lathe, or any other lathe that uses a 30mm post toolrest. You only need one, it sits down in the banjo (toolrest holder) and has a hole for the...

150mm toolrest for the old VL100 mini lathe, no longer in production

80mm toolrest for the old VL100 mini lathe, no longer in production

S shaped toolrest for VL175/200 lathe. Great for bowls.

16 inch toolrest for vicmarc VL300 lathe

Z shaped toolrest for VL300 lathe. Great for bowls.

The Rotating Union M16 x 1.5 screws into the outboard side of Vicmarc lathes (excluding the VL150 mini lathe) and connects to the vacuum hose. Two ball bearings prevent the hose from spinning...

These Rotating Unions have a dovetail pickup to suite a self-centering four jaw chuck. It can also be mounted directly to the lathe spindle with an M45x2 internal thread , which requires a VM120/150...

These Rotating Unions have a dovetail pickup to suite a self-centering four jaw chuck. It can also be mounted directly to the lathe spindle with an M45x2 internal thread , which requires a VM120/150...

Precision machined cast aluminium. Each cylinder includes two neoprene seals for internal or external pickups. The Vacuum cups can be used with any of the three rotating unions. Two of the three...

Precision machined cast aluminium. Each cylinder includes two neoprene seals for internal or external pickups. The Vacuum cups can be used with any of the three rotating unions. Two of the three...

This unit consists of a 300mm diameter foam covered plate and is fitted with a V01217 Rotating union (included). Requires a VM120 insert to adapt it to your lathe.

Vacuum plate can accept a VM90/100 insert and be mounted directly to the lathe spindle. If used on a Vicmarc Lathe in this configuration, the V01215 M16 x 1.5 Rotating Union is required. It can also...

Counterbalance weight for Vicmarc Escoulen Eccentric Chuck. Picture shows 4 counter balance weights. Price includes one counterbalance weight only.

*Please note, actual bore size is 13mm, slightly larger than 1/2". This tool handle has been designed to be both ergonomical and functional. The handle is manufactured from high grade aluminium with...

*Please note, actual bore size is 17.5mm, slightly larger than 5/8".  This tool handle has been designed to be both ergonomical and functional. The handle is manufactured from high grade...

*Please note, actual bore size is 19.05mm This tool handle has been designed to be both ergonomical and functional. The handle is manufactured from high grade aluminium with a soft PVC outer shell...

This chuck is threaded directly, meaning it will mount directly onto the lathe spindle without an insert. Now available in 1"x8tpi and 1-1/4"x8tpi The VM100 T - Bar Allen Key operated chuck allows...

This insert will adapt the Vicmarc VM90 and VM100 chucks to any lathe with a 5/8” Spindle with no thread.Vicmarc's Vacuum Cups also accept this insert

This insert will adapt the Vicmarc VM90 and VM100 chucks to any lathe with an M33 x 3.5 Spindle thread. Vicmarc's Vacuum Cups also accept this insert All left hand, left hand/right hand, Geiger,...

Direct thread 1-1/4"x8tpi. This chuck will thread directly on to most full size lathes sold in the USA without an adapter. The VM120 T- Bar Allen Key operated chuck provides one - hand tightening...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1-1/2" x 6tpi Spindle thread (Very uncommon). Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1-1/4" x 8tpi Spindle thread. Will work on both right and left hand threads. Vicmarc's Eccentric chucks and the...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with an M33 x 3.5 Spindle thread. Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert All...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a M33x3.5 left spindle thread (Most likely on the outboard side). Vicmarc's Eccentric chucks and the Vicmarc Oval...

This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws Direct thread 1-1/4"x8tpi. This chuck will thread directly on to most full size lathes sold in the...