Oneway 2288 1/2" Master Spindle Gouge Tool Only
- Calculated at Checkout
Mastercut Turning Tools
- the steel
- the surface finish of the flute
- the geometry and position of the flute
ONEWAY has considered all aspects to make what we feel are the ultimate gouges for today's informed turner.
The steel used to make all tools in the MASTERCUT line is a CPM M4 HSS - a high-tech particle metal. Making our tools from CPM HSS is what truly sets them above the competition. This powder manufacturing process distributes the carbides uniformly throughout the steel. This process prevents the globular, irregular distribution of carbides and alloys as found in conventional HSS.
Advantages of having such uniformity in the steel:
- easier to sharpen
- performs more consistently
- maintains its edge longer (up to 3 times longer)
Note: The carbides in this steel are very fine. This means there are more of them on the cutting edge of the tool at all times compared to lower grade steel.
FLUTE SURFACE FINISH
The flute is finely finished resulting in a better cutting edge. The diameter of the tool is also well finished so the tool feels good in your hand and slides smoothly over the tool rest.
Tools are hardened to 63 RC and the flutes ground from the solid. This accomplishes two things:
- There is no decarburization during hardening so the edge gets as hard as it should. Result -- the edge will get sharper and stay sharper longer.
- It assures that the finish in the flute is very good. Result -- a smooth finish allows wood cutting to slide easily through the flute when turning.
THE GEOMETRY AND POSITION OF THE FLUTE
All flute designs are a compromise. The designers at ONEWAY strive to achieve the best middle ground between the following:
- ability to remove material
- agility in tight corners
- fine finishing capabilities
- ability to resist both vibration and twisting forces
Extensive correspondence with professional wood turners took place before finalizing the design of these tools.