Jointing

Used for cutting keyhole slots in plaques, picture frames and other wall hanging items.

Designed for creating T-slot wall panels (used to cut their characteristic slots for many purposes) and radiused edges on the T-slots (allow easier adjustment of fixtures on the completed wall panels). For best results use in CNC and table-mounted...

Designed for creating T-slot wall panels (used to cut their characteristic slots for many purposes) and radiused edges on the T-slots (allow easier adjustment of fixtures on the completed wall panels). For best results use in CNC and table-mounted...

The dovetail joint is the strongest construction method for drawers, boxes, chests and fine casework.

The dovetail joint is the strongest construction method for drawers, boxes, chests and fine casework.

The dovetail joint is the strongest construction method for drawers, boxes, chests and fine casework.

The dovetail joint is the strongest construction method for drawers, boxes, chests and fine casework.

The dovetail joint is the strongest construction method for drawers, boxes, chests and fine casework.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Two-and three-wing slotting cutters are available individually. Use a two-wing cutter for faster feed rates, three-wing cutters for better cut finish.

Tool No. 53410 Diameter (D) 1-7/8 Cutting Height (B) 1/4 Shank (d) 1/4 Overall Length (L) 2-3/8 Cutting Depth (C) 1/2 Wings 3

The 'Quadraset' with its four cutters enables you to cut grooves and dados from 1/8 through *23/32 (3.2MM-18.0MM) in increments of 1/32 (0.1MM). Tongue and Groove can also be achieved with proper set-up. Fully diagrammed instructions included for both...

Box Joint' set containing 3-wing slotting cutters and spacers for producing jewelry boxes, drawers, etc. Complete with cutters, spacers, arbor and ball bearing to achieve 1/2 depth of cut. Recommended stock thickness (height: 3/4 though 1-5/8). For...

With this one bit, cut a lock joint that is ideal for quick construction of strong drawer boxes. Use in a table-mounted router only. The same bit setting is used for both halves of the joint; adjust the fence position slightly to switch between sides and...

With this one bit, cut a lock joint that is ideal for quick construction of strong drawer boxes. Use in a table-mounted router only. The same bit setting is used for both halves of the joint; adjust the fence position slightly to switch between sides and...

The glue joint cut by this bit is strong and self-aligning. One setup produces both halves of the joint. Adjust the bit so the center of the profile aligns with the stock center. Cut one part face down, the mate face up. Bit works on stock center between...

First piece is cut flat (horizontal) and the second is cut perpendicular (vertical) to the first for a perfect fit. There is no need to re-align the router depth, provided that the wood is centered to the cutting edge of the bit. Not recommended for use...

With this assembly, you can cut one-finger through five-fingers in multiple passes. Both cuts are performed the same way; you simply turn over the counter-cut for a perfect fit (see diagrams). All cutters feature 'chipbreakers' behind each cutting tooth...

Cut perfectly fitted tongue-and-groove joints on stock between 3/8 and 1-1/8 thick with a table-mounted router and this assembly. The tool consists of an arbor with an integral shank, two identical, removable slotting cutters, and a pair of bearings. To...

Can be used for T and G flooring or other applications requiring a wedge pattern type. For 5/8 through 1-1/4 stock. Available individually or as a 2-piece set.

Can be used for T and G flooring or other applications requiring a wedge pattern type. For 5/8 through 1-1/4 stock. Available individually or as a 2-piece set.