VM100 Chuck Jaws

These Jaws were developed by the owner of Woodworker's Emporium for use on the Vicmarc Oval Device (VOD) to grab an oval recess in the process of turning an oval form. They were made specifically to fit the Vicmarc VM100 220mm Bowl Jaws, but...

The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...

The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...

The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...

Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart. VM90 and VM100 chucks...

Due to customer demand this jaw has been designed to accommodate larger workpieces. Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a perfect...

Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot. These Jaws were specially made for Woodworker's Emporium due to customer demand to fall in between the Standard (1-7/8") and the 100mm (4") Jaws. The...

These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. The sizes indicated on the drawing are when the jaws form a perfect...

By removing one or more of the dovetail segments from these jaws, they are adaptable to a variety of uses. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart. VM90 and VM100 chucks...

These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. They are ideal for turning salt and pepper shakers. The sizes indicated on the drawing are when the jaws form a...

Pin Jaws, designed by well known American Woodturner and author Dick Sing, are used for such items as kaleidoscopes and pepper grinders, etc. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws...

Made from Acetyl and allows you to turn you own chuck jaws for whatever diameter is required to hold the work piece. Once screwed to a chuck, simply turn the Acetyl Jaws for each job required using turning chisels. The sizes indicated on the drawing...

Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpieces...

Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpieces...

Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpieces...

Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpieces...

These are the standard jaws supplied with the VM100 chuck, also available to purchase separately. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart. VM90 and VM100 chucks provide...

Pen Blank Jaw set comes as a set of 2 and are designed to clamp pen blank squares for drilling.These Jaws can clamp from 10mm square blanks up to 48mm square blanks.

Pen Blank Jaw set comes as a set of 2 and are designed to clamp pen blank squares for drilling. These Jaws can clamp from 15mm square blanks up to 63mm square blanks.