VM120 Chuck Jaws

VM120 Chuck Jaws

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • HDPE Plastic Jaws for Vicmarc Oval Device HDPE Plastic Jaws for Vicmarc Oval Device
    Add to Cart

    HDPE Plastic Jaws for Vicmarc Oval Device

    Woodworker's Emporium

    $39.50
    These Jaws were developed by the owner of Woodworker's Emporium for use on the Vicmarc Oval Device (VOD) to grab an oval recess in the process of turning an oval form. They were made specifically to fit the Vicmarc VM100 220mm Bowl Jaws, but...
    $39.50
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $39.50
    Subtotal:
  • Out of stock
    Vicmarc V00672 VM120 Bowl Jaws 285mm (11-1/4")

    Vicmarc V00672 VM120 Bowl Jaws 285mm (11-1/4")

    Vicmarc

    $109.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00672
    $109.95
    Out of stock
    Qty in Cart: 0
    Price:
    $109.95
    Subtotal:
  • Vicmarc V00673 VM120 Bowl Jaws 385mm (15-1/8")
    Add to Cart

    Vicmarc V00673 VM120 Bowl Jaws 385mm (15-1/8")

    Vicmarc

    $114.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00673
    $114.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $114.95
    Subtotal:
  • Vicmarc V00674 VM120 Bowl Jaws 485mm (19")
    Add to Cart

    Vicmarc V00674 VM120 Bowl Jaws 485mm (19")

    Vicmarc

    $139.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00674
    $139.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $139.95
    Subtotal:
  • Out of stock
    Vicmarc V00675 VM120 Dovetail Jaws 85mm (3-3/8") Vicmarc V00675 measurements

    Vicmarc V00675 VM120 Dovetail Jaws 85mm (3-3/8")

    Vicmarc

    $66.95
    Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot. These 85mm (3-3/8") Jaws were designed to fill the gap between the Standard 68mm (2-5/8") and the 105mm (4") Jaws. The sizes indicated on the drawing are...
    V00675
    $66.95
    Out of stock
    Qty in Cart: 0
    Price:
    $66.95
    Subtotal:
  • Out of stock
    Vicmarc V00676 VM120 Dovetail Jaws 105mm (4") Vicmarc V00676 VM120 105mm Dovetail Jaw dimensions

    Vicmarc V00676 VM120 Dovetail Jaws 105mm (4")

    Vicmarc

    $56.95
    Designed for mounting bowls by expanding into a recess or clamping onto a spigot.The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart. VM120 and VM150 chucks provide approx 48mm of...
    V00676
    $56.95
    Out of stock
    Qty in Cart: 0
    Price:
    $56.95
    Subtotal:
  • Out of stock
    Vicmarc V00677 VM120 Dovetail Jaws 128mm Vicmarc V00677 VM120 128mm Dovetail Jaw dimensions

    Vicmarc V00677 VM120 Dovetail Jaws 128mm (5")

    Vicmarc

    $65.95
    Designed for mounting bowls by expanding into a recess or clamping onto a spigot.The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart. VM120 and VM150 chucks provide approx 48mm of...
    V00677
    $65.95
    Out of stock
    Qty in Cart: 0
    Price:
    $65.95
    Subtotal:
  • Vicmarc V00678 VM120 Dovetail Jaws 148mm (5-7/8") Vicmarc V00678 VM120 148mm Dovetail Jaw dimensions
    Add to Cart

    Vicmarc V00678 VM120 Dovetail Jaws 148mm (5-7/8")

    Vicmarc

    $79.95
    Designed for mounting bowls by expanding into a recess or clamping onto a spigot.The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart. VM120 and VM150 chucks provide approx 48mm of...
    V00678
    $79.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $79.95
    Subtotal:
  • Vicmarc V00679 VM120 Dovetail Jaws 173mm Vicmarc V00679 VM120 173mm Dovetail Jaw dimensions
    Add to Cart

    Vicmarc V00679 VM120 Dovetail Jaws 173mm (6-7/8")

    Vicmarc

    $89.95
    Designed for mounting bowls by expanding into a recess or clamping onto a spigot.The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart. VM120 and VM150 chucks provide approx 48mm of...
    V00679
    $89.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $89.95
    Subtotal:
  • Vicmarc V00680 VM120 Dovetail Jaws 198mm Vicmarc V00680 VM120 198mm Dovetail Jaw dimensions
    Add to Cart

    Vicmarc V00680 VM120 Dovetail Jaws 198mm (7-3/4")

    Vicmarc

    $99.95
    Designed for mounting bowls by expanding into a recess or clamping onto a spigot.The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart. VM120 and VM150 chucks provide approx 48mm of...
    V00680
    $99.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $99.95
    Subtotal:
  • Vicmarc V00682 VM120 Dovetail Jaws 223mm Vicmarc V00682 VM120 223mm Dovetail Jaw dimensions
    Add to Cart

    Vicmarc V00682 VM120 Dovetail Jaws 223mm (8-3/4")

    Vicmarc

    $109.95
    Designed for mounting bowls by expanding into a recess or clamping onto a spigot.The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart. VM120 and VM150 chucks provide approx 48mm of...
    V00682
    $109.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $109.95
    Subtotal:
  • Out of stock
    Vicmarc V00684 Long Nose Jaws Vicmarc V00684 Long Nose Jaw dimensions

    Vicmarc V00684 VM120 Long Nose Jaws

    Vicmarc

    $69.95
    These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example, when turning serviette rings or remounting rough turned...
    V00684
    $69.95
    Out of stock
    Qty in Cart: 0
    Price:
    $69.95
    Subtotal:
  • Vicmarc V00686 VM120 Multipurpose Jaws Vicmarc V00686 VM120 Multipurpose Jaw dimensions
    Add to Cart

    Vicmarc V00686 VM120 Multipurpose Jaws with removable segments

    Vicmarc

    $189.95
    By removing one or more of the dovetail segments from these jaws, they are adaptable to a variety of uses. The wide range of expansion and contraction of the Uni-Chuck provides for unique adaptability when using these jaws.
    V00686
    $189.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $189.95
    Subtotal:
  • Out of stock
    Vicmarc V00687 VM120 25mm Pin Jaws Vicmarc V00687 VM120 25mm Pin Jaw Dimensions

    Vicmarc V00687 VM120 25mm Pin Jaws

    Vicmarc

    $68.95
    These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very small articles, the jaws can be unscrewed and the...
    V00687
    $68.95
    Out of stock
    Qty in Cart: 0
    Price:
    $68.95
    Subtotal:
  • Out of stock
    Vicmarc V00688 VM120 35mm Pin Jaws Vicmarc V00688 VM120 35mm Pin Jaw dimensions

    Vicmarc V00688 VM120 35mm Pin Jaws

    Vicmarc

    $68.95
    These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very small articles, the jaws can be unscrewed and the...
    V00688
    $68.95
    Out of stock
    Qty in Cart: 0
    Price:
    $68.95
    Subtotal:
  • Vicmarc V00689 VM120 Pipe Jaws Vicmarc V00689 VM120 Pipe Jaws
    Add to Cart

    Vicmarc V00689 VM120 Pipe Jaws

    Vicmarc

    $99.95
    The Pipe Jaw set comes as a set of 2 and are designed to clamp square sections of wood. Items such as smoking pipes and other offset parts can be made using these Jaws. The four points on each Jaw allow for a firm grip on the part. The rectangular...
    V00689
    $99.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $99.95
    Subtotal:
  • Vicmarc V00690 VM120 Plastic Jaws 150mm ( 6") Vicmarc V00690 VM120 150mm Plastic Jaw dimensions
    Add to Cart

    Vicmarc V00690 VM120 Plastic Jaws 150mm ( 6")

    Vicmarc

    $29.95
    Made from Acetyl and allows you to turn you own chuck jaws for whatever diameter is required to hold the work piece. Once screwed to a chuck, simply turn the Acetyl Jaws for each job required using turning chisels.
    V00690
    $29.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $29.95
    Subtotal:
  • Vicmarc V00691 VM120 Shark Jaws 130mm (5-1/4") Vicmarc V00691 VM120 130mm Shark Jaw dimensions
    Add to Cart

    Vicmarc V00691 VM120 Shark Jaws 130mm (5-1/4")

    Vicmarc

    $108.95
    Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and provide vastly better grip than traditional jaws used to turn...
    V00691
    $108.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $108.95
    Subtotal:
  • Out of stock
    Vicmarc V00692 VM120 Shark Jaws 55mm (2-1/8") Vicmarc V00692 VM120 55mm Shark Jaw dimensions

    Vicmarc V00692 VM120 Shark Jaws 55mm (2-1/8")

    Vicmarc

    $65.95
    Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and provide vastly better grip than traditional jaws used to turn...
    V00692
    $65.95
    Out of stock
    Qty in Cart: 0
    Price:
    $65.95
    Subtotal:
  • Vicmarc V00693 VM120 Shark Jaws 68mm (2-5/8") Vicmarc V00693 VM120 68mm Shark Jaw dimensions
    Add to Cart

    Vicmarc V00693 VM120 Shark Jaws 68mm (2-5/8")

    Vicmarc

    $65.95
    Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and provide vastly better grip than traditional jaws used to turn...
    V00693
    $65.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $65.95
    Subtotal:
  • Vicmarc V00694 VM120 Shark Jaws 83mm (3-1/4") Vicmarc V00694 VM120 Shark Jaws dimensions
    Add to Cart

    Vicmarc V00694 VM120 Shark Jaws 83mm (3-1/4")

    Vicmarc

    $108.95
    Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and provide vastly better grip than traditional jaws used to turn...
    V00694
    $108.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $108.95
    Subtotal:
  • Vicmarc V00696 VM120 Step Jaws Vicmarc V00696 VM120 Step Jaw dimensions
    Add to Cart

    Vicmarc V00696 VM120 Step Jaws

    Vicmarc

    $65.95
    Step Jaws, designed by the famous Australian woodturner and author Richard Raffan, and are used for holding a range of spigot sizes with minimum jaw movement and without the necessity to change the jaws.
    V00696
    $65.95
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $65.95
    Subtotal:
  • Total: items /

Adding your products to cart