Lathe Accessories

Add another banjo to your Vicmarc lathe to be able to use double post tool rests. Great for long spindle turning.

500mm Extension Bed for the Vicmarc VL240 Lathe, requires V01059 Extension Bed Stand. Ideal for turning between centers. Pictured with Lathe and Extension stand, sold separately

The Vicmarc Deep Hole Drilling Tailstock can be used in place of a traditional tailstock and is suitable for fast and conventional drilling.  The Deep Hole Drilling Tailstock can drill up to depths of 215mm without having to repositioning it...

This Swing Away Tailstock Support System was originally designed by Vicmarc and due to popular demand we are happy to re-introduce this newly redesigned model. This will be suitable for all the existing VL300 short bed lathes. The swing away tailstock...

This balancing system is especially designed to be mounted on the outboard side of your lathe and is suited to do out-of-round off-centre work. By doing so, this will allow to work on higher RPM.

The 1000mm bed extension for mounting on the VL300 short, includes 4 x M14 high tensile bolts with two hardened bushes for accurate location. Also available heavy duty stand and single support leg to accommodate extension bed.

500mm Extension Bed can be attached to the lathe with no support leg. Ideal for turning between centers.

Used to set a height on your toolrest allowing you to unlock the toolrest and swivel/move the toolrest without changing the set height.

Used to set a height on your toolrest allowing you to unlock the toolrest and swivel/move the toolrest without changing the set height.

The Outboard Turning Attachment has a 40mm diameter support post that is locked with indexed locking levers. This is a very rigid outboard attachment and has a swan neck to increase access to the work piece. The Vicmarc Outboard turning attachment is...

Oval turning is an old art of turning, it has been practiced since the middle ages. Professor Johannes Volmer was able to create a system for oval turning using tooth belts for smooth operation. Vicmarc has re-engineered this device and simplified the...

Vicmarc's safety ring allows you to turn in reverse or outboard, without the chuck coming undone from the spindle. Only works to mount a Vicmarc Chuck to a Vicmarc Lathe, will not work with other brands.

Use 1 inch diameter post toolrests in your Vicmarc lathe, or any other lathe that uses a 30mm post toolrest. You only need one, it sits down in the banjo (toolrest holder) and has a hole for the locking lever to go through. You do not need a separate one...

Type a description for this product here...

Extension bed spport leg for VL150 mini-lathe.

Adjustable height support leg for VL300 bed extensions