Four Jaw Chucks

Four Jaw Chucks

  • Vicmarc V00280-4 VM90 Chuck without Jaws
    Choose Options

    Vicmarc

    Vicmarc V00280-4 VM90 Chuck No Jaws

    $189.95
    Accepts any jaws that will fit a VM100 chuck (jaws sold separately) The VM90 chuck is for those who prefer to operate the chuck using the quick- acting TommyBars (levers), which saves time when mounting and dismounting. The VM90's compact size makes it...
    V00280-4
    $189.95
    Choose Options
  • Out of stock
    Vicmarc V00282-4 VM100 3.5" T-Bar Chuck No Jaws

    Vicmarc

    Vicmarc V00282-4 VM100 3.5" T-Bar Chuck No Jaws

    $209.95
    The VM100 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures...
    V00282-4
    $209.95
    Out of stock
  • Vicmarc V00282-4 VM100 3.5" T-Bar Chuck
    Choose Options

    Vicmarc

    Vicmarc V00283-4 VM100 3.5" T-Bar Chuck with Jaws

    $229.95
    The VM100 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures...
    V00283-4
    $229.95
    Choose Options
  • V00283-6 VM100 3.5" T-Bar Chuck Direct Thread 1-1/4"x8

    Vicmarc

    Vicmarc V00283-6 VM100 3.5" T-Bar Chuck 1-1/4"x8tpi with Jaws

    $239.95
    Direct thread 1-1/4"x8tpi. This chuck will thread on most full size lathes without an adapter. The VM100 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll...
    V00283-6
    $239.95
  • Vicmarc V00284-5 VM120 5" T-Bar Chuck No Jaws
    Choose Options

    Vicmarc

    Vicmarc V00284-5 VM120 5" T-Bar Chuck No Jaws

    $249.95
    The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures...
    V00284-5
    $249.95
    Choose Options
  • Vicmarc V00285-5 VM120 5" T-Bar Chuck with Jaws
    Choose Options

    Vicmarc

    Vicmarc V00285-5 VM120 5" T-Bar Chuck with Jaws

    $279.95
    The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures...
    V00285-5
    $279.95
    Choose Options
  • Vicmarc V00288-5 VM150 6" Chuck No Jaws
    Choose Options

    Vicmarc

    Vicmarc V00288-5 VM150 6" Chuck No Jaws

    $369.95
    This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated (fully opens within 3 revolutions), the other to tighten using the...
    V00288-5
    $369.95
    Choose Options
  • Out of stock
    Vicmarc V00289-5 VM150 6" Chuck

    Vicmarc

    Vicmarc V00289-5 VM150 6" Chuck with Jaws

    $389.95
    This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated (fully opens within 3 revolutions), the other to tighten...
    V00289-5
    $389.95
    Out of stock
  • Vicmarc V00283-5 VM100 3.5" T-Bar Chuck Direct Thread

    Vicmarc

    Vicmarc VM100 5" T-Bar Chuck 1-1/4"x8tpi

    $239.95
    Vicmarc Requires a minimum order of 100 of these chucks. Since not many people use such a small chuck on a full size lathe, we would most likely never sell through that many.
    $239.95
  • Vicmarc VM120 5" T-Bar Chuck Direct Thread 1-1/4"x8tpi.
    Choose Options

    Vicmarc

    Vicmarc VM120 5" T-Bar Chuck 1-1/4"x8tpi

    $259.95 - $289.95
    Direct thread 1-1/4"x8tpi. This chuck will thread directly on to most full size lathes sold in the USA without an adapter. The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to...
    $259.95 - $289.95
    Choose Options
  • Vicmarc V00289-3 VM150 6" Chuck with Jaws direct thread
    Choose Options

    Vicmarc

    Vicmarc VM150 6" Chuck 1-1/4"x8tpi

    $379.95 - $399.95
    This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws Direct thread 1-1/4"x8tpi. This chuck will thread directly on to most full size lathes sold in the USA without an insert or adapter. The VM150 has two...
    $379.95 - $399.95
    Choose Options