Vicmarc
Vicmarc V00620 Replacement Pinion Pin
- SKU:
- V00620
- UPC:
- MPN:
- V00620
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$1.00
Was:
— You save
Frequently bought together:
Description
This replacement pin holds the pinion in place on Vicmarc Chucks. Works for both the VM100 and VM120. This is the older style pin and does not have threads at the top like the newer version. It will still work on newer chucks, it's just a little more difficult to remove than the threaded version.
Related Products
Out of stock
Vicmarc V00632 VM100 Replacement Pinion
Vicmarc
MSRP:
Now:
$22.95
Was:
Replacement pinion for Vicmarc VM90/100 chucks
V00900
Out of stock
Vicmarc V00901 VM120 Replacement Pinion
Vicmarc
MSRP:
Now:
$22.95
Was:
Replacement pinion for Vicmarc VM120/150 chucks
V00901


Vicmarc V00650 VM100 Pin Jaws 25mm (1")
Vicmarc
MSRP:
Now:
$59.00
Was:
These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. They are ideal for turning salt and pepper shakers.
The sizes...
V00650
Out of stock


Vicmarc V00687 VM120 25mm Pin Jaws
Vicmarc
MSRP:
Now:
$68.95
Was:
These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn...
V00687
Out of stock


Vicmarc V00688 VM120 35mm Pin Jaws
Vicmarc
MSRP:
Now:
$94.00
Was:
These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn...
V00688
Customers Also Viewed
Out of stock


Vicmarc V00659 VM100 Pen Blank Jaws 35mm
Vicmarc
MSRP:
Now:
$52.00
Was:
Pen Blank Jaw set comes as a set of 2 and are designed to clamp pen blank squares for drilling.These Jaws can clamp from 10mm square blanks up to 48mm square blanks.
V00659
Out of stock

Vicmarc V00670 Set of 4 Backing Jawset for VM120
Vicmarc
MSRP:
Now:
$94.95
Was:
Replacement backing jaws for Vicmarc VM120 chucks
V00670
Out of stock

Vicmarc VM100 3.5" Direct Thread T-Bar Chuck with Jaws
Vicmarc
MSRP:
Now:
$249.00
Was:
This chuck is threaded directly, meaning it will mount directly onto the lathe spindle without an insert. Now available in 1"x8tpi and 1-1/4"x8tpi
The VM100 T - Bar Allen Key operated chuck allows...

Vicmarc V01256 3/4" to 6mm Reduction Bushing
Vicmarc
MSRP:
Now:
$16.95
Was:
3/4" OD Reduction Bushes are available in four sizes. Hole Diameter Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259
V01256
Out of stock

Vicmarc V00640 VM100 Bowl Jaws 285mm (11-1/4")
Vicmarc
MSRP:
Now:
$118.00
Was:
The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either...
V00640

Vicmarc V00997 VM120 and VM150 replacement set of Jaw screws (8)
Vicmarc
MSRP:
Now:
$5.95
Was:
Replacement M6x12 Screws for VM120 and VM150 chuck jaws. Pack of 8
V00997

Vicmarc V01257 3/4" to 3/8" Reduction Bushing
Vicmarc
MSRP:
Now:
$16.95
Was:
3/4" OD Reduction Bushes are available in four sizes. Hole Diameter Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259
V01257

Vicmarc V01258 3/4" to 1/2" Reduction Bushing
Vicmarc
MSRP:
Now:
$16.95
Was:
3/4" OD Reduction Bushes are available in four sizes. Hole Diameter Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259
V01258

Vicmarc V01259 3/4" to 5/8" Reduction Bushing
Vicmarc
MSRP:
Now:
$16.95
Was:
3/4" OD Reduction Bushes are available in four sizes. Hole Diameter Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259
V01259

Tormek SVD-186 Gouge Jig
Tormek
MSRP:
Now:
$97.00
Was:
With the Tormek gouge jig SVD-186 you can easily sharpen your fingernail shaped woodturning gouges to a razor sharpness. The high level of control enables you to exactly replicate your chosen profile...
63366