Vicmarc
Vicmarc V00681 VM120/VM150 Dovetail Jaws 90mm
(No reviews yet)
Write a Review
- SKU:
- V00681
- MPN:
- V00681
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot.
These jaws are custom made dovetail jaws for Woodworkers Emporium only. We felt there was an need for an in between jaws size that was not available. The jaws are cut into for the screws but this does not weaken the holding power.
These dovetail jaws were listed at 66mm but to keep with the measurements of the rest of the dovetails they are 90mm on the outside on the full circle.
Related Products
Vicmarc V00676 VM120 Dovetail Jaws 105mm (4")
Vicmarc
$69.00
Designed for mounting bowls by expanding into a recess or clamping onto a spigot.
The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are...
V00676
Vicmarc V00677 VM120 Dovetail Jaws 128mm (5")
Vicmarc
$69.00
Designed for mounting bowls by expanding into a recess or clamping onto a spigot.
The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are...
V00677
Out of stock
Vicmarc V00695 Standard Jaws for VM120
Vicmarc
$67.00
Supplied with the chuck, but also available to purchase separately.
V00695
Out of stock
Vicmarc V00696 VM120 Step Jaws
Vicmarc
$68.00
Step Jaws, designed by the famous Australian woodturner and author Richard Raffan, and are used for holding a range of spigot sizes with minimum jaw movement and without the necessity to change the...
V00696
Out of stock
Vicmarc V00997 VM120 and VM150 replacement set of Jaw screws (8)
Vicmarc
$5.95
Replacement M6x12 Screws for VM120 and VM150 chuck jaws. Pack of 8
V00997
