Vicmarc
Vicmarc V00689 VM120 Pipe Jaws
- SKU:
- V00689
- Availability:
- Normally Ships out in 1-3 Business Days
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
The Pipe Jaw set comes as a set of 2 and are designed to clamp square sections of wood. Items such as smoking pipes and other offset parts can be made using these Jaws. The four points on each Jaw allow for a firm grip on the part. The rectangular clamping arms can be removed and a smaller section can be held close up as shown to the left. The smaller section has serrations which help hold the part. Different axis can be turned by repositioning the timber.
Related Products
Vicmarc V00684 VM120 Long Nose Jaws
Vicmarc
$69.95
These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example,...
V00684
Out of stock
Vicmarc V00677 VM120 Dovetail Jaws 128mm (5")
Vicmarc
$65.95
Designed for mounting bowls by expanding into a recess or clamping onto a spigot.The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm...
V00677
Out of stock
Vicmarc V00688 VM120 35mm Pin Jaws
Vicmarc
$68.95
These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very...
V00688
Vicmarc V00695 Standard Jaws for VM120
Vicmarc
$64.95
Supplied with the chuck, but also available to purchase separately.
V00695
Vicmarc V00696 VM120 Step Jaws
Vicmarc
$65.95
Step Jaws, designed by the famous Australian woodturner and author Richard Raffan, and are used for holding a range of spigot sizes with minimum jaw movement and without the necessity to change the...
V00696
