Festool

EVA edge banding adhesive in brown color to match most dark colored edge banding. Pack of 48. Also available in black, white and natural.

EVA edge banding adhesive in black color to match most dark colored edge banding. Pack of 48. Also available in brown, white and natural.

Like adding a drawer to the bottom of a Systainer SYS 2 TL, the SYS-Combi expands the range of customizable and efficient storage and mobility solutions. Customize your storage needs by putting a...

Like adding a drawer to the bottom of a Systainer SYS 3 TL, the SYS-Combi expands the range of customizable and efficient storage and mobility solutions. Customize your storage needs by putting a...

At the full size of a Systainer SYS 4 TL and equipped with three large drawers (with dividers), the new SORTAINER SYS 4 is an all-new, lighter format than the traditional Sortainers, with a new style...

HEPA Main Filter captures 99.99% of particulate matter down to .3 microns, helping you work cleaner and breathe easier.

Designed for use with VAC SYS Clamping Modules, this continuous-duty pump is quiet, efficient, and features a front-panel pressure gauge for easy monitoring.

Clamping Module with Round Vacuum Cup and Foot Valve for clamping non-pourous material with Vacuum Pump. In Systainer SYS 4.

Work more efficiently with the new VAC SYS System. With proven vacuum-based suction clamping, the VAC SYS provides a highly effective and ergonomic work platform for nearly any project. Effectively...

Boom arm set for CT26 and CT36. Includes CT Handle (495 802), CT Boom Arm (492 753), Boom Arm Tool Holder (493 558), and Boom Arm Support Bracket (496 780)

Includes Parallel Guides (495717) and Parallel Guide Extensions (495718)

 The SYS-MINI is the most compact SYSTAINER yet - allowing convenient storage for hand tools, fasteners, and other small parts. Keep smaller items organized within the Festool modular SYSTAINER...

The limited-time Centrotec Starter Kit is the most compact collection of bits for most common driving applications. This 74-piece version features Robertson Square Drive, Pozidrive, Phillips, and...

The SYS-MINI is the most compact SYSTAINER yet - allowing convenient storage for hand tools, fasteners, and other small parts. Keep smaller items organized within the Festool modular SYSTAINER...

Plastic, diameter 2-13/16" (70 mm).

Festool's Antistatic hose design helps you work cleaner by preventing dust from accumulating on the exterior of the hose. It helps you work more safely by preventing static discharge or shocks. And...

Replacement Rotating Hose Connector for attaching Festool Antistatic D 27 (27mm) hoses to the inlet of the CT 22 and CT 33 Dust Extractors. External diameter 58 mm. Use replacement rotating...

Replacement Rotating Hose Connector for attaching Festool Antistatic D 50 (50mm) hoses to the inlet of the CT 22 and CT 33 Dust Extractors. External diameter 58 mm. Use replacement rotating...

Get the most out of your system by connecting various sized hoses into one long length with the Non-Antistatic Hose Reducer. Non-antistatic hose reducer for reducing from 50mm to 36mm hose or when...

To connect two suction hoses to Festool CT dust extractors.

3 piece, 37 1/2" (950 mm) D 36.

Plastic, length 14 5/8" (370 mm)

High-quality industrial design; aluminum. Width 14 5/8" (370 mm); 2 casters, 2 brush inserts.

Plastic, length 14 5/8" (370 mm)

Protect your investment in Festool Guide Rails with the durable nylon Carrying Case for Festool Guide Rails. For convenient and protected transport or storage of up to two FS 1400/2 or shorter guide...

Hole Punch to perforate standard sheet abrasives for use with dust extraction on the RS 2 E half sheet orbital sander. Easy to use - simply attach sheet abrasive to the sander, and apply hole punch...

Connect any number of guide rails for accurate, limitless cutting with Festool Guide Rail Connectors. Connectors fit in integrated guide rail T-slots for secure cutting. Includes 1 connector (2 are...

For connecting 2 MFT tables. Pack of 1 (2 are needed). Note: MFT/3 does not connect to MFT 1080 or MFT 800.

The Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter...

The Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter...

The Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter...

The Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter...

The Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter...

The Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter...

The Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter...

MPE Sanding Pad with non-marring edge for use with non-Festool abrasives on the RS 2 E sander. The secret to a great finish lies in the use of the right pad and abrasive for the application at hand...

Replacement non-slip adhesive strips for FS Guide Rails. Helps deliver consistent, accurate cutting results, especially on smooth materials such as sheet goods, without the need for clamps. Includes...

The S75/4 is an excellent blade for fast and clean cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard. The cross-set teeth are perfect for both fast and clean cuts. Works well as...

The S 75/2.5 jigsaw blade is an excellent choice for fine cutting in a wide range of materials. Precise, clean cuts can be achieved in softwood, hardwood, melamine, veneered plywood, chipboard, soft...

The HS 75/3 bi jigsaw blade is a bi-metal blade for for fast cuts in a wide range of materials. Ideal for plastics (soft and hard), ABS, HDPE, Plexiglas, acrylics, cement board, iron, steel, and...