Centers and Drives

Centers and Drives

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Robust LA-LC Live Center
    Add to Cart

    Robust

    Robust LA-LC Live Center

    $119.00
    Robust Live Center Robust Live Centers use bigger bearings, and warrants them for five years. A precision 40 degree angular contact ball bearing, sealed and lubricated for life, carries both the thrust load and rear radial load. Combined with a precision...
    69029
    Qty in Cart: 0
    Quantity:
    Price:
    $119.00
    Subtotal:
  • Out of stock
    Vermec ACC-189 Heavy Duty Drive dog

    Vermec

    Vermec ACC-189 Heavy Duty Drive dog

    $76.95
    Can be mounted in two ways: either with the Morse Taper directly into the lathe spindle or by using the cylindrical hold in a chuck to avoid damage to the Morse Taper. The point is hardened and removable. Morse Taper #2
    200294
    Qty in Cart: 0
    Price:
    $76.95
    Subtotal:
  • Vermec ACC-199 8" Safety Drive
    Add to Cart

    Vermec

    Vermec ACC-199 8" Safety Drive

    $74.95
    For off-center turning. Extra long 200mm. Morse Taper 2. Made from High Tensile Steel.
    201206
    Qty in Cart: 0
    Quantity:
    Price:
    $74.95
    Subtotal:
  • Out of stock
    Vermec ACC-323 Live Center - Large Cone

    Vermec

    Vermec ACC-323 Live Center - Large Cone

    $109.95
    Large Cone Live Centre Morse Taper #2 Supports work pieces up to 75mm Plated Steel Body and Aluminium Cone
    200315
    Qty in Cart: 0
    Price:
    $109.95
    Subtotal:
  • Vermec ACC-325 Hollow Live Center MT2
    Add to Cart

    Vermec

    Vermec ACC-325 Hollow Live Center MT2

    $109.95
    Hollow Live Centre Morse Taper 2 with removable tip for drilling through Tailstock spindle.10mm hole Hole through body allows shavings to fall away or be blown out with compressed air to avoid clogging.
    200241
    Qty in Cart: 0
    Quantity:
    Price:
    $109.95
    Subtotal:
  • Out of stock
    Vermec ACC-341 4 in 1 Live Center

    Vermec

    Vermec ACC-341 4 in 1 Live Center

    $114.95
    4 in 1 set includes 1 cup point with hardened tip, 1 large cone point, 1 small cone point, 1 extended small cone and MT2 body with 2 bearings. Points are quickly interchangeable.
    200292
    Qty in Cart: 0
    Price:
    $114.95
    Subtotal:
  • Out of stock
    Vicmarc Multi Drive - insert sold separately

    Vicmarc

    Vicmarc V00344-5 Multi dogs drive

    $156.95
    Consists of 3 individually removable Drive Dogs, 18mm, 26mm and 42mm, and a threaded adapter to suit a VM120 insert  (sold separately)
    V00344-5
    Qty in Cart: 0
    Price:
    $156.95
    Subtotal:
  • Vicmarc V00950 Drive Dog Punch
    Add to Cart

    Vicmarc

    Vicmarc V00950 Drive Dog Punch

    $58.95
    This accessory is designed to punch a drive dog impression on your stock piece of timber. This is done simply by holding the punch onto the timber and hammering the back. Using this tool will save you undue thrust on your lathe and live centre bearings.
    V00950
    Qty in Cart: 0
    Quantity:
    Price:
    $58.95
    Subtotal:
  • Total: items /

Adding your products to cart