Chucks

Chucks

  • Vicmarc V00289-3 VM150 6" Chuck with Jaws direct thread
    Choose Options

    Vicmarc

    Vicmarc VM150 6" Chuck 1-1/4"x8tpi

    MSRP: $399.95
    $379.95
    This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws Direct thread 1-1/4"x8tpi. This chuck will thread directly on to most full size lathes sold in the USA without an insert or adapter. The VM150 has two...
    MSRP: $399.95
    $379.95
    Choose Options
  • Vicmarc VM120 5" T-Bar Chuck Direct Thread 1-1/4"x8tpi.
    Choose Options

    Vicmarc

    Vicmarc VM120 5" T-Bar Chuck 1-1/4"x8tpi

    $259.95 - $289.95
    Direct thread 1-1/4"x8tpi. This chuck will thread directly on to most full size lathes sold in the USA without an adapter. The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to...
    $259.95 - $289.95
    Choose Options
  • Vicmarc V01228 Vacuum Plate only, no adapter
    Add to Cart

    Vicmarc

    Vicmarc V01228 Vacuum Plate only, no adapter

    $99.50
    Vacuum plate can accept a VM90/100 insert and be mounted directly to the lathe spindle. If used on a Vicmarc Lathe in this configuration, the V01215 M16 x 1.5 Rotating Union is required. It can also be mounted directly to a V01216 or V01217 Rotating...
    V01228
    $99.50
    Add to Cart
  • Vicmarc V01223 Vacuum Chuck 200mm (8" diam.)
    Add to Cart

    Vicmarc

    Vicmarc V01223 Vacuum Chuck 200mm (8" diam.)

    $159.95
    Precision machined cast aluminium. Each cylinder includes two neoprene seals for internal or external pickups. The Vacuum cups can be used with any of the three rotating unions. Two of the three rotating unions (10mm inlet or 32mm inlet) can mount...
    V01223
    $159.95
    Add to Cart
  • Vicmarc V01222 Vacuum Chuck 150mm (6" diam.)
    Add to Cart

    Vicmarc

    Vicmarc V01222 Vacuum Chuck 150mm (6" diam.)

    $118.95
    Precision machined cast aluminium. Each cylinder includes two neoprene seals for internal or external pickups. The Vacuum cups can be used with any of the three rotating unions. Two of the three rotating unions (10mm inlet or 32mm inlet) can mount...
    V01222
    $118.95
    Add to Cart
  • Vicmarc V01221 Vacuum Chuck 100mm (4" diam.)
    Add to Cart

    Vicmarc

    Vicmarc V01221 Vacuum Chuck 100mm (4" diam.)

    $74.95
    Precision machined cast aluminium. Each cylinder includes two neoprene seals for internal or external pickups. The Vacuum cups can be used with any of the three rotating unions. Two of the three rotating unions (10mm inlet or 32mm inlet) can mount...
    V01221
    $74.95
    Add to Cart
  • Out of stock
    Vicmarc V01216 Vacuum Rotary Union 10mm Diam Inlet

    Vicmarc

    Vicmarc V01216 Vacuum Rotary Union 10mm Diam Inlet

    $139.95
    These Rotating Unions have a dovetail pickup to suite a self-centering four jaw chuck. It can also be mounted directly to the lathe spindle with an M45x2 internal thread , which requires a VM120/150 chuck Insert to adapt to your lathe (Sold separately)...
    V01216
    $139.95
    Out of stock
  • Vicmarc V01215 Vacuum Rotary Union Vicmarc V01215 Vacuum Rotary Union
    Add to Cart

    Vicmarc

    Vicmarc V01215 Vacuum Rotary Union

    $114.95
    The Rotating Union M16 x 1.5 screws into the outboard side of Vicmarc lathes and connects to the vacuum hose. Two ball bearings prevent the hose from spinning. Please note, some of the older Vicmarc models are not threaded inside the spindle. Please...
    V01215
    $114.95
    Add to Cart
  • Vicmarc V00380-5 Eccentric Chuck #2 with Insert
    Choose Options

    Vicmarc

    Vicmarc V00380-5 Eccentric Chuck #2 with Insert

    $149.95
    The Eccentric Chuck #2 allows multi-axis turning and will accept all the accessories made for the Vicmarc Escoulen Chuck. This comes with insert pickup, available in a variety of sizes to adapt to your lathe. Ball sold separately. The ball adaptor turns...
    V00380-5
    $149.95
    Choose Options
  • Vicmarc V00380-5 Eccentric Chuck #2 1-1/4x8
    Add to Cart

    Vicmarc

    Vicmarc V00380-3 Eccentric Chuck #2 1-1/4x8

    $149.95
    The Eccentric Chuck #2 allows multi-axis turning and will accept all the accessories made for the Vicmarc Escoulen Chuck. Direct thread, meaning it will thread directly onto an 1-1/4"x8tpi spindle. The ball adaptor turns 360 degrees and the ball will...
    V00380-3
    $149.95
    Add to Cart
  • Vicmarc V00296-5 Eccentric chuck #4
    Choose Options

    Vicmarc

    Vicmarc V00296-5 Eccentric chuck #4

    $295.95
    The Eccentric Chuck #4 is designed and manufactured by Vicmarc Machinery and it expands the possibilities for off center turning. The main feature of the chuck is its infintely variable axis setting capacity.  With the range of 0 to 30mm  each...
    V00296-5
    $295.95
    Choose Options
  • Vicmarc V00296-3 Eccentric chuck #4
    Add to Cart

    Vicmarc

    Vicmarc V00296-3 Eccentric chuck #4 1-1/4"x8tpi

    $295.95
    The Eccentric Chuck #4 is designed and manufactured by Vicmarc Machinery and it expands the possibilities for off center turning. This version has a direct thread of 1-1/4"x8tpi. The main feature of the chuck is its infintely variable axis setting...
    V00296-3
    $295.95
    Add to Cart
  • Out of stock
    Vicmarc V00295-5 Eccentric chuck #3

    Vicmarc

    Vicmarc V00295-5 Eccentric chuck #3

    $494.95
    The Vicmarc Escoulen Chuck originally designed by Jean Francois Escoulen and manufactured by Vicmarc expands the possibilities for off-axis turning. The accessories also allow multi-axis turning. The main feature of the chuck is its infintely variable...
    V00295-5
    $494.95
    Out of stock
  • Vicmarc V00295-3 Eccentric Chuck 1-1/4"x8 Direct Thread
    Add to Cart

    Vicmarc

    Vicmarc V00295-3 Eccentric Chuck 1-1/4"x8 Direct Thread

    $494.95
    The Vicmarc Escoulen Chuck originally designed by Jean Francois Escoulen and manufactured by Vicmarc expands the possibilities for off-axis turning. The accessories also allow multi-axis turning. The main feature of the chuck is its infintely variable...
    V00295-3
    $494.95
    Add to Cart
  • Out of stock
    Vicmarc V00289-5 VM150 6" Chuck

    Vicmarc

    Vicmarc V00289-5 VM150 6" Chuck with Jaws

    $389.95
    This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated (fully opens within 3 revolutions), the other to tighten...
    V00289-5
    $389.95
    Out of stock
  • Vicmarc V00288-5 VM150 6" Chuck No Jaws
    Choose Options

    Vicmarc

    Vicmarc V00288-5 VM150 6" Chuck No Jaws

    $369.95
    This chuck uses the same jaws as the VM120. Click HERE for a listing of compatible jaws The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated (fully opens within 3 revolutions), the other to tighten using the...
    V00288-5
    $369.95
    Choose Options
  • Vicmarc V00285-5 VM120 5" T-Bar Chuck with Jaws
    Choose Options

    Vicmarc

    Vicmarc V00285-5 VM120 5" T-Bar Chuck with Jaws

    $279.95
    The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures...
    V00285-5
    $279.95
    Choose Options
  • Vicmarc V00284-5 VM120 5" T-Bar Chuck No Jaws
    Choose Options

    Vicmarc

    Vicmarc V00284-5 VM120 5" T-Bar Chuck No Jaws

    $249.95
    The VM120 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures...
    V00284-5
    $249.95
    Choose Options
  • V00283-6 VM100 3.5" T-Bar Chuck Direct Thread 1-1/4"x8

    Vicmarc

    Vicmarc V00283-6 VM100 3.5" T-Bar Chuck 1-1/4"x8tpi with Jaws

    $239.95
    Sorry, this is no longer available. Vicmarc requires a minimum order of 100 chucks to make these. Since most people use these on a mini lathe, we would never sell through that many.
    V00283-6
    $239.95
  • Vicmarc V00282-4 VM100 3.5" T-Bar Chuck
    Choose Options

    Vicmarc

    Vicmarc V00283-4 VM100 3.5" T-Bar Chuck with Jaws

    $229.95
    The VM100 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures...
    V00283-4
    $229.95
    Choose Options
  • Out of stock
    Vicmarc V00282-4 VM100 3.5" T-Bar Chuck No Jaws

    Vicmarc

    Vicmarc V00282-4 VM100 3.5" T-Bar Chuck No Jaws

    $209.95
    The VM100 T- Bar Allen Key operated chuck provides one - hand tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures...
    V00282-4
    $209.95
    Out of stock
  • Vicmarc V00280-4 VM90 Chuck without Jaws
    Choose Options

    Vicmarc

    Vicmarc V00280-4 VM90 Chuck No Jaws

    $189.95
    Accepts any jaws that will fit a VM100 chuck (jaws sold separately) The VM90 chuck is for those who prefer to operate the chuck using the quick- acting TommyBars (levers), which saves time when mounting and dismounting. The VM90's compact size makes it...
    V00280-4
    $189.95
    Choose Options
  • Vicmarc Pen Blank Chuck 1"x8tpi
    Add to Cart

    Vicmarc

    Vicmarc Pen Blank Chuck 1"x8tpi

    $149.95
    Drill a perfectly centered hole in your blank on your lathe using this unique lathe chuck. The chuck includes two jaws that will hold your blanks perfectly centered at the headstock. Mount a drill chuck with your drill bit into your tailstock and...
    V00279-6
    $149.95
    Add to Cart
  • Vicmarc Pen Blank Chuck M40
    Choose Options

    Vicmarc

    Vicmarc Pen Blank Chuck

    $149.95
    Drill a perfectly centered hole in your blank on your lathe using this unique lathe chuck. The chuck includes two jaws that will hold your blanks perfectly centered at the headstock. Mount a drill chuck with your drill bit into your tailstock and...
    V00279-4
    $149.95
    Choose Options
  • Out of stock
    Vermec CHU-500 Multi-Center Chuck

    Vermec

    Vermec CHU-500 Multi-Center Chuck

    $289.95
    Designed by Guilio Marcolongo, the CHU-500 Multi Center Chuck is ideal for off-center turning up to 32mm in 4mm increments. The chuck has two dovetailed pick-ups to match Vicmarc chucks, but it will work on most 4-jaw chucks with dovetailed jaws. The...
    220470
    $289.95
    Out of stock