Chuck Jaws

Chuck Jaws

  • HDPE Plastic Jaws for Vicmarc Oval Device HDPE Plastic Jaws for Vicmarc Oval Device
    Add to Cart

    Woodworker's Emporium

    HDPE Plastic Jaws for Vicmarc Oval Device

    $39.50
    These Jaws were developed by the owner of Woodworker's Emporium for use on the Vicmarc Oval Device (VOD) to grab an oval recess in the process of turning an oval form. They were made specifically to fit the Vicmarc VM100 220mm Bowl Jaws, but...
    $39.50
    Add to Cart
  • Vermec CHU-003 V-grip for Bowl Jaws
    Add to Cart

    Vermec

    Vermec CHU-003 V-grip for Bowl Jaws

    $92.95
    V-Grip Extension Set is to be used in conjunction with the existing Bowl Jaws and it allows for an offset pickup distance as illustrated above and used to re-chuck bowls that don't have a flat front allowing you to finish the base of the bowl. The Bowl...
    200312
    $92.95
    Add to Cart
  • Out of stock
    Vermec CHU-547 Internal Mini step Jaws for VM100 Chuck

    Vermec

    Vermec CHU-547 Internal Mini step Jaws for VM100 Chuck

    $67.95
    Used to hold small work by expanding into the recess or opening of your project. 3 step sizes are: 15mm, 20mm and 25mm. Suits Vermec, Vicmarc VM90 and VM100 Chucks, Grizzly Chucks, and other similar look-alikes
    201205
    $67.95
    Out of stock
  • Vicmarc V00639 VM100 Bowl Jaws 220mm (8-5/8")
    Add to Cart

    Vicmarc

    Vicmarc V00639 VM100 Bowl Jaws 220mm (8-5/8")

    $97.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00639
    $97.95
    Add to Cart
  • Vicmarc V00640 VM100 Bowl Jaws 285mm (11-1/4")
    Add to Cart

    Vicmarc

    Vicmarc V00640 VM100 Bowl Jaws 285mm (11-1/4")

    $99.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00640
    $99.95
    Add to Cart
  • Vicmarc V00641 VM100 Bowl Jaws 385mm (15-1/8")
    Add to Cart

    Vicmarc

    Vicmarc V00641 VM100 Bowl Jaws 385mm (15-1/8")

    $105.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00641
    $105.95
    Add to Cart
  • Vicmarc V00642 VM100 Dovetail Jaws 100mm (4") Vicmarc V00642 VM100 Dovetail Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00642 VM100 Dovetail Jaws 100mm (4")

    $54.95
    Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot.  The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart .  VM90 and...
    V00642
    $54.95
    Add to Cart
  • Vicmarc V00643 VM100 Dovetail Jaws 144mm (5-5/8") Vicmarc V00643 VM100 Dovetail Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00643 VM100 Dovetail Jaws 144mm (5-5/8")

    $62.95
    Due to customer demand this jaw has been designed to accommodate larger workpieces. Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a...
    V00643
    $62.95
    Add to Cart
  • Out of stock
    Vicmarc V00644S VM100 Dovetail Jaws 78mm (3")

    Vicmarc

    Vicmarc V00644S VM100 Dovetail Jaws 78mm (3")

    $55.95
    Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot. These Jaws were specially made for Woodworker's Emporium due to customer demand to fall in between the Standard (1-7/8") and the 100mm (4") Jaws. The...
    V00644S
    $55.95
    Out of stock
  • Vicmarc V00647 VM100 Long Nose Jaws 35mm Vicmarc V00647 VM100 35mm Long Nose Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00647 VM100 Long Nose Jaws 35mm

    $55.95
    These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. The sizes indicated on the drawing are when the jaws form a perfect...
    V00647
    $55.95
    Add to Cart
  • Vicmarc V00649 VM100 Multipurpose Jaws Vicmarc V00649 VM100 Multipurpose Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00649 VM100 Multipurpose Jaws

    $169.95
    By removing one or more of the dovetail segments from these jaws, they are adaptable to a variety of uses. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart.  VM90 and...
    V00649
    $169.95
    Add to Cart
  • Vicmarc V00650 VM100 Pin Jaws 25mm (1") Vicmarc V00650 VM100 25mm Pin Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00650 VM100 Pin Jaws 25mm (1")

    $54.95
    These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. They are ideal for turning salt and pepper shakers. The sizes indicated on the drawing are when the jaws form a perfect...
    V00650
    $54.95
    Add to Cart
  • Vicmarc V00651 VM100 Pin Jaws 35mm (1-3/8") Vicmarc V00651 VM100 35mm Pin Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00651 VM100 Pin Jaws 35mm (1-3/8")

    $64.95
    Pin Jaws, designed by well known American Woodturner and author Dick Sing, are used for such items as kaleidoscopes and pepper grinders, etc. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws...
    V00651
    $64.95
    Add to Cart
  • Vicmarc V00652 VM100 Plastic Jaws 125mm (5") Vicmarc V00652 VM100 125mm Plastic Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00652 VM100 Plastic Jaws 125mm (5")

    $23.95
    Made from Acetyl and allows you to turn you own chuck jaws for whatever diameter is required to hold the work piece. Once screwed to a chuck, simply turn the Acetyl Jaws for each job required using turning chisels. The sizes indicated on the drawing are...
    V00652
    $23.95
    Add to Cart
  • Vicmarc V00653 VM100 Shark Jaws 48mm (1-3/4") Vicmarc V00653 VM100 48mm Shark Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00653 VM100 Shark Jaws 48mm (1-3/4")

    $55.95
    Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpieces. The...
    V00653
    $55.95
    Add to Cart
  • Out of stock
    Vicmarc V00654 VM100 Shark Jaws 55mm (2-1/8") Vicmarc V00654 VM100 55mm Shark Jaw dimensions

    Vicmarc

    Vicmarc V00654 VM100 Shark Jaws 55mm (2-1/8")

    $55.95
    Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpieces. The...
    V00654
    $55.95
    Out of stock
  • Vicmarc V00655 VM100 Shark Jaws 74mm (2-7/8") Vicmarc V00655 VM100 74mm Shark Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00655 VM100 Shark Jaws 74mm (2-7/8")

    $89.95
    Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpieces. The...
    V00655
    $89.95
    Add to Cart
  • Vicmarc V00656 VM100 Shark Jaws 88mm (3-3/8") Vicmarc V00656 VM100 88mm Shark Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00656 VM100 Shark Jaws 88mm (3-3/8")

    $89.95
    Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpieces. The...
    V00656
    $89.95
    Add to Cart
  • Vicmarc V00657 VM100 Standard Jaws Vicmarc V00657 VM100 Standard Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00657 VM100 Standard Jaws

    $54.95
    These are the standard jaws supplied with the VM100 chuck, also available to purchase separately. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart.  VM90 and VM100 chucks...
    V00657
    $54.95
    Add to Cart
  • Vicmarc V00672 VM120 Bowl Jaws 285mm (11-1/4")
    Add to Cart

    Vicmarc

    Vicmarc V00672 VM120 Bowl Jaws 285mm (11-1/4")

    $109.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00672
    $109.95
    Add to Cart
  • Vicmarc V00673 VM120 Bowl Jaws 385mm (15-1/8")
    Add to Cart

    Vicmarc

    Vicmarc V00673 VM120 Bowl Jaws 385mm (15-1/8")

    $114.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00673
    $114.95
    Add to Cart
  • Vicmarc V00674 VM120 Bowl Jaws 485mm (19")
    Add to Cart

    Vicmarc

    Vicmarc V00674 VM120 Bowl Jaws 485mm (19")

    $139.95
    The adjustable jaws allow you to re-chuck bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internal or external, with 8 unique soft plastic stoppers,...
    V00674
    $139.95
    Add to Cart
  • Vicmarc V00676 VM120 Dovetail Jaws 105mm (4") Vicmarc V00676 VM120 105mm Dovetail Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00676 VM120 Dovetail Jaws 105mm (4")

    $56.95
    Designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart.  VM120 and VM150 chucks provide approx 48mm...
    V00676
    $56.95
    Add to Cart
  • Out of stock
    Vicmarc V00676XX VM120 Dovetail Jaws 86mm (3-3/8") Vicmarc V00676XX VM120 Dovetail Jaw dimensions

    Vicmarc

    Vicmarc V00676XX VM120 Dovetail Jaws 86mm (3-3/8")

    $67.95
    Dovetail jaws are designed for mounting bowls by expanding into a recess or clamping onto a spigot. These 86mm (3-3/8") Jaws were specially made for Woodworker's Emporium due to customer demand to fall in between the Standard 68mm (2-5/8") and the 105mm...
    V00676XX
    $67.95
    Out of stock
  • Vicmarc V00677 VM120 Dovetail Jaws 128mm Vicmarc V00677 VM120 128mm Dovetail Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00677 VM120 Dovetail Jaws 128mm (5")

    $65.95
    Designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a perfect circle, which is achieved when the jaws are 2mm apart.  VM120 and VM150 chucks provide approx 48mm...
    V00677
    $65.95
    Add to Cart
  • Vicmarc V00684 Long Nose Jaws Vicmarc V00684 Long Nose Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00684 VM120 Long Nose Jaws

    $69.95
    These jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example, when turning serviette rings or remounting rough turned...
    V00684
    $69.95
    Add to Cart
  • Vicmarc V00687 VM120 25mm Pin Jaws Vicmarc V00687 VM120 25mm Pin Jaw Dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00687 VM120 25mm Pin Jaws

    $68.95
    These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very small articles, the jaws can be unscrewed and the...
    V00687
    $68.95
    Add to Cart
  • Vicmarc V00688 VM120 35mm Pin Jaws Vicmarc V00688 VM120 35mm Pin Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00688 VM120 35mm Pin Jaws

    $68.95
    These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very small articles, the jaws can be unscrewed and the...
    V00688
    $68.95
    Add to Cart
  • Vicmarc V00689 VM120 Pipe Jaws Vicmarc V00689 VM120 Pipe Jaws
    Add to Cart

    Vicmarc

    Vicmarc V00689 VM120 Pipe Jaws

    $99.95
    The Pipe Jaw set comes as a set of 2 and are designed to clamp square sections of wood. Items such as smoking pipes and other offset parts can be made using these Jaws. The four points on each Jaw allow for a firm grip on the part. The rectangular...
    V00689
    $99.95
    Add to Cart
  • Vicmarc V00690 VM120 Plastic Jaws 150mm ( 6") Vicmarc V00690 VM120 150mm Plastic Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00690 VM120 Plastic Jaws 150mm ( 6")

    $29.95
    Made from Acetyl and allows you to turn you own chuck jaws for whatever diameter is required to hold the work piece. Once screwed to a chuck, simply turn the Acetyl Jaws for each job required using turning chisels.
    V00690
    $29.95
    Add to Cart
  • Vicmarc V00691 VM120 Shark Jaws 130mm (5-1/4") Vicmarc V00691 VM120 130mm Shark Jaw dimensions
    Add to Cart

    Vicmarc

    Vicmarc V00691 VM120 Shark Jaws 130mm (5-1/4")

    $108.95
    Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold.  they hold cylinder spigots much more safely than standard jaws.  They are much easier and provide vastly better grip than traditional jaws...
    V00691
    $108.95
    Add to Cart