Turning Adapters

This collet fits 5/8" diameter round tool heads and is universal to all AccuRight Series handles.

Mortis Taper #1 Adjustable Pen Mandrel

SB Adapter Sleeves fit into the Stuart Batty Bolsters for the Taper Lock Handle System (Handles and bolsters sold separately). The adapter sleeves are offered in different sizes to fit almost any round woodturning tool. The bolster...

SB Adapter Sleeves fit into the Stuart Batty Bolsters for the Taper Lock Handle System (Handles and bolsters sold separately). The adapter sleeves are offered in different sizes to fit almost any round woodturning tool. The bolster...

SB Adapter Sleeves fit into the Stuart Batty Bolsters for the Taper Lock Handle System (Handles and bolsters sold separately). The adapter sleeves are offered in different sizes to fit almost any round woodturning tool. The bolster...

SB Adapter Sleeves fit into the Stuart Batty Bolsters for the Taper Lock Handle System (Handles and bolsters sold separately). The adapter sleeves are offered in different sizes to fit almost any round woodturning tool. The bolster...

Vermec Chuck Inserts to suit Bonham, Nova, Vermec and Vicmarc Chucks. Designed to allow for easy fitting. Flat sides for easy fitting and removal. Suits Vicmarc VM90 and VM100

Female thread: 1" x 8tpi Male thread: 1.25" x 8tpi

Female thread: 1" x 8tpiMale thread: 1.5" x 8tpi

Female thread: 1" x 8tpi Male thread: 3/4" x 16tpi

Female thread: 1.25" x 8tpi Male thread: 1" x 8tpi

Female thread: 1.25" x 8tpi Male thread: 1.5" x 8tpi

Female thread: 1.5" x 8tpiMale thread: M33 x 3.5

Female thread: M33 x 3.5 Male thread: 1" x 8tpi

Female thread: M33 x 3.5 Male thread: 1.25" x 8tpi

3/4" OD Reduction Bushes are available in four sizes.  Hole Diameter  Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259

3/4" OD Reduction Bushes are available in four sizes.  Hole Diameter  Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259

3/4" OD Reduction Bushes are available in four sizes.  Hole Diameter  Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259

3/4" OD Reduction Bushes are available in four sizes.  Hole Diameter  Part Number 6mm V01256 9.5mm (3/8") V01257 12.7mm (1/2") V01258 15.8mm (5/8") V01259

This insert will adapt the Vicmarc VM90 and VM100 chucks to any lathe with a 5/8” Spindle with no thread. Vicmarc's Vacuum Cups also accept this insert

This insert will adapt the Vicmarc VM90 and VM100 chucks to any lathe with a 1" x 8tpi Spindle thread. Vicmarc's Vacuum Cups also accept this insert All left hand, left hand/right hand, Geiger, M30x3.5, M33x3.5 and 1 1/4x8 inserts come with a grub...

This insert will adapt the Vicmarc VM90 and VM100 chucks to any lathe with a 1-1/4" x 8tpi Spindle thread. Vicmarc's Vacuum Cups also accept this insert All left hand, left hand/right hand, Geiger, M30x3.5, M33x3.5 and 1 1/4x8 inserts come with a grub...

This insert will adapt the Vicmarc VM90 and VM100 chucks to any lathe with an M33 x 3.5 Spindle thread. Vicmarc's Vacuum Cups also accept this insert All left hand, left hand/right hand, Geiger, M30x3.5, M33x3.5 and 1 1/4x8 inserts come with a grub...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1" x 8tpi Spindle thread. Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert All left hand, left hand/right hand, Geiger, M30x3.5, M33x3.5...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1-1/2" x 6tpi Spindle thread (Very uncommon). Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1-1/4" x 8tpi Spindle thread. Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert All left hand, left hand/right hand, Geiger, M30x3.5,...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1-1/4" x 8tpi Spindle thread. Will work on both right and left hand threads. Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert All left...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with an M33 x 3.5 Spindle thread. Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert All left hand, left hand/right hand, Geiger, M30x3.5, M33x3...

This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a M33x3.5 left spindle thread (Most likely on the outboard side). Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert All left hand, left...