Eccentric Turning

10mm ball for off axis turning on an Escoulen Eccentric Chuck. Requires a ball adapter if you're using the new Vicmarc Escoulen Chuck.

Quickly and accurately size your tenons for the Escoulen Eccentric Chuck. Measures 10mm, 18mm, 22mm, 32mm, and 40mm tenons. 

Quickly and accurately size your tenon for the Vicmarc Eccentric Chuck #3. Measures 22mm, 40mm, and 52mm tenons. 

The Vicmarc Escoulen Chuck originally designed by Jean Francois Escoulen and manufactured by Vicmarc expands the possibilities for off-axis turning. The accessories also allow multi-axis turning. The main feature of the chuck is its infintely variable...

The Vicmarc Escoulen Chuck originally designed by Jean Francois Escoulen and manufactured by Vicmarc expands the possibilities for off-axis turning. The accessories also allow multi-axis turning. The main feature of the chuck is its infintely variable...

The Eccentric Chuck #4 is designed and manufactured by Vicmarc Machinery and it expands the possibilities for off center turning. This version has a direct thread of 1-1/4"x8tpi. The main feature of the chuck is its infintely variable axis setting...

The Eccentric Chuck #4 is designed and manufactured by Vicmarc Machinery and it expands the possibilities for off center turning. The main feature of the chuck is its infintely variable axis setting capacity.  With the range of 0 to 30mm  each...

22mm ball for off axis turning on an Escoulen Eccentric Chuck. Requires a ball adapter if you're using the new Vicmarc Escoulen Chuck.

40mm ball for off axis turning on an Escoulen Eccentric Chuck. Requires a ball adapter if you're using the new Vicmarc Escoulen Chuck.

For use with the Vicmarc Eccentric Chuck. Requires a 10, 22, or 40mm ball (ball sold separately). Also accepts the threaded ball for a the eccentric faceplate Click here for a Guide to the Vicmarc Eccentric Chuck

M30x2 Threaded faceplate for Vicmarc Escoulen Chuck for multi-axis turning. Requires Vicmarc V00369 threaded ball. 90mm (3-1/2") diameter

M30x2 Threaded ball for Vicmarc Escoulen Chuck. Use with V00368 Threaded faceplate for multi-axis turning.

22mm cup chuck for the Vicmarc Escoulen Eccentric Chuck. Allows for off center turning only. A Ball adapter is required to do any off axis turning.

For use with the Vicmarc Eccentric Chuck #3

For use with the Vicmarc Eccentric Chuck #3

90mm faceplate for the Vicmarc Escoulen Eccentric Chuck. Allows for off center turning only. A Ball adapter is required to do any off axis turning.

Requires a Vicmarc V00367 Ball Adapter and either a 10mm, 22mm, or 40mm ball. A threaded ball and faceplate can also be used.

The Eccentric Chuck #2 allows multi-axis turning and will accept all the accessories made for the Vicmarc Escoulen Chuck. Direct thread, meaning it will thread directly onto an 1-1/4"x8tpi spindle. The ball adaptor turns 360 degrees and the ball will...

The Eccentric Chuck #2 allows multi-axis turning and will accept all the accessories made for the Vicmarc Escoulen Chuck. This comes with insert pickup, available in a variety of sizes to adapt to your lathe. Ball sold separately. The ball adaptor turns...

Counterbalance weight for Vicmarc Escoulen Eccentric Chuck. Picture shows 4 counter balance weights. Price includes one counterbalance weight only.